No products were found matching your selection.
Other Related Products
-
- Roll Widths: 300–1,400 mm (custom to 1,350mm)
- Roll Length: Adjustable, typically 200–400 m
- MOQ: As low as 100 kg (≈500 kg for certain grades)
Customizable Enhancements:
- Anti-scratch or anti-fog coatings
- UV stabilization or conductive/ESD treatment
- Surface corona for improved printability
-
- Material: BOPET / polyester film
- Surface Treatment: One-side or both-side corona
- Thickness: 8–75 microns
- Appearance: Clear, clean, smooth
- Treated Side: Commonly 50–52+ dyn/cm
- Use: Printing, coating, lamination, tape, metallizing
-
- Material: Polyester (PET) base film
- Surface: Scratch-resistant or hard-coated
- Thickness: Common custom range 20–120 μm
- Finish: Clear, matte, or anti-glare optional
- Adhesion: Controlled low, medium, or high peel
- Supply Form: Roll, sheet, or die-cut parts
-
COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…
-
- Brand: PET Film Supply Company
- Manufacturer: Protective film for aluminium profiles manufacturer
- Material: High-quality polyethylene (PE) or PVC
- Thickness: 50–150 microns
- Color: Transparent or white
- Adhesive Type: Pressure-sensitive, residue-free
- UV Resistance: Optional, UV-stable for outdoor use
-
- Material:Biaxially oriented PET / BOPET
- Thickness:12–50 μm common range
- Width:500–2200 mm available
- Color:Clear transparent, metallizing grade
- Treatment:One-side or two-side primer coating
- Use:Printing, metallizing, coating, lamination
-
- Material:Flame retardant polyester film
- Thickness:25–250 μm typical range
- Color:Clear, milky white, black, or custom
- Flame Rating:UL94 VTM-rated options
- Surface:Untreated, corona treated, or coated
- Use:Battery, motor, transformer, and electronic insulation
-
- Material: PE or PET protective film
- Color: clear, translucent, black & white
- Thickness: 50–100 microns typical
- Adhesive: water-based acrylic or acrylic PSA
- Width: custom slit rolls and sheet formats
- Use stage: fabrication, transport, installation, renovation
-
- Material: Optical PET with ITO conductive coating
- Color: Clear transparent
- Common thickness: 125 μm / 175 μm / 200 μm
- Coating side: One-side conductive surface
- Supply format: Rolls, sheets, slit rolls, custom-cut parts
- Main uses: Touch, display, heater, shielding, sensor parts
