No products were found matching your selection.
Other Related Products
-
- Material: Biaxially oriented PET
- Color: Natural clear
- Thickness: Typical reference 12-250 um
- Formats: Master rolls, slit rolls, cut sheets
- Surface: Untreated or basic treated options
- Uses: Printing, lamination, packaging, graphics
-
- Residue-Free Removal: Easily peel off without leaving any adhesive residue, ensuring a clean surface.
- Customizable Adhesion Levels: Available in low, medium, and high adhesion strengths to suit different processing needs.
- UV and Weather Resistant: Suitable for both indoor and limited outdoor applications, with UV stability up to 3 months.
- Printable Surface: Option to print logos or handling instructions, enhancing brand visibility.
- Eco-Friendly Materials: Made from recyclable polyethylene (PE), compliant with RoHS and REACH standards.
- Versatile Application: Ideal for protecting mirror, brushed, and matte stainless steel surfaces during various processes.
-
- Base Material: Clear or blue PET film
- Coating Type: Silicone-free release coating
- Common Thickness: 25μm, 36μm, 50μm, 75μm, 100μm, 125μm
- Release Force: 5–30 g/in, 30–80 g/in, 80–150 g/in options
- Roll Format: Narrow slit rolls or master rolls, 3 inch or 6 inch cor
- Main Uses: OCA, electronics die cutting, medical adhesive tape, precision adhesive converting
-
- Material: Polyester (PET) base film
- Surface: Scratch-resistant or hard-coated
- Thickness: Common custom range 20–120 μm
- Finish: Clear, matte, or anti-glare optional
- Adhesion: Controlled low, medium, or high peel
- Supply Form: Roll, sheet, or die-cut parts
-
COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…
-
- Materials: PC, PET, acrylic, or multilayer film
- Thickness: Common project range 125-500 um
- Appearance: Clear, tinted, translucent, printed, or metallic
- Finish: Gloss, matte, textured, or formable coated surface
- Supply: Rolls, sheets, printed blanks, or preformed inserts
- Process: Printing, forming, trimming, and back-injection
-
- Material: PET polyester film
- Color options: clear, matte, white, black, or custom
- Common thickness: approx. 25–250 microns
- Supply format: die cut pieces, kiss-cut sheets, or roll form
- Adhesive option: single-sided, double-sided, or non-adhesive
- Liner option: paper liner, film liner, or differential release liner
-
A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.
-
- Material: PET film with siliconized release surface
- Thickness: 25 / 36 / 50 / 75 / 100 micron
- Color: Clear, milky white, blue tint or customized
- Release Type: Single-side, double-side or differential release
- Roll Form: Jumbo roll or slit roll
- Main Uses: Labels, tapes, die-cut parts, PSA lamination
