No products were found matching your selection.
Other Related Products
-
- Material: Polyester (PET) base film
- Surface: Scratch-resistant or hard-coated
- Thickness: Common custom range 20–120 μm
- Finish: Clear, matte, or anti-glare optional
- Adhesion: Controlled low, medium, or high peel
- Supply Form: Roll, sheet, or die-cut parts
-
- Material:Glassine paper, kraft paper, PE coated paper, or PET film
- Color:White, yellow, blue, clear, or custom color
- Thickness:Paper 40–120gsm; PET film 25–75μm
- Release Side:One-side or two-side silicone coating
- Format:Jumbo roll, slit roll, sheet liner, or custom width
- Use:Sticker rolls, kiss-cut sheets, printed stickers, and labels
-
- Material: PE film
- Color: Clear, blue, or milky white
- Adhesive: Low-tack acrylic
- Typical Thickness: 50–100 μm
- Supply Form: Slit rolls or larger rolls
- Main Use: Temporary screen surface protection
-
The COF of PET film describes resistance when a defined surface starts and continues sliding against another surface. This reference applies to uncoated, coated, treated and PET-based protective film used in unwinding, slitting, laminating and die cutting. Each result must be read with its tested sides, method, load and conditioning history. Equipment compatibility, adhesive behavior and removal performance still require sample testing on the actual material and process.
-
- Material: Removable PE film with acrylic adhesive
- Color: Clear, blue, black and white, or printed
- Thickness: Commonly 30-80 um; extended grades subject to review
- Width: Custom slit widths for panel lines
- Roll format: Machine-length or jumbo rolls
- Surfaces: MDF, melamine, cabinet, and decorative boards
-
- Roll Widths: 300–1,400 mm (custom to 1,350mm)
- Roll Length: Adjustable, typically 200–400 m
- MOQ: As low as 100 kg (≈500 kg for certain grades)
Customizable Enhancements:
- Anti-scratch or anti-fog coatings
- UV stabilization or conductive/ESD treatment
- Surface corona for improved printability
-
- Material:BOPET / polyester film
- Finish:Super matte, low gloss
- Thickness:12–100 μm, common range
- Width:500–2050 mm, slit roll available
- Color:Clear, translucent, white, or matte metallized
- Use:Printing, lamination, labels, packaging, decorative surfaces
-
- Material: PE film with removable acrylic adhesive
- Thickness: 50 um, 60 um, 80 um, 100 um
- Width: 600 mm, 900 mm, 1200 mm, or slit width
- Color: clear, blue, milky white, or printed
- Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
- Use: protects laminate planks during installation and handover
-
Clear shipping film for amplifier control panels helps limit scratches, scuffs, trapped dust, fingerprints, and packaging contact marks on display windows, printed overlays, painted faceplates, and plastic control areas during assembly, storage, and transport. The correct film is not selected by transparency alone. It must provide enough surface contact to remain stable without creating excessive removal force after the planned protection period. Surface type, coating condition, panel geometry, packaging pressure, temperature, humidity, transport distance, and the intended removal method should all be evaluated on an actual panel before full use.
