No products were found matching your selection.
Other Related Products
-
- Roll Widths: 300–1,400 mm (custom to 1,350mm)
- Roll Length: Adjustable, typically 200–400 m
- MOQ: As low as 100 kg (≈500 kg for certain grades)
Customizable Enhancements:
- Anti-scratch or anti-fog coatings
- UV stabilization or conductive/ESD treatment
- Surface corona for improved printability
-
COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…
-
A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.
-
- Material: Polyester (PET) base film
- Surface: Scratch-resistant or hard-coated
- Thickness: Common custom range 20–120 μm
- Finish: Clear, matte, or anti-glare optional
- Adhesion: Controlled low, medium, or high peel
- Supply Form: Roll, sheet, or die-cut parts
-
- Common thickness: 12–250 microns
- Material type: PET / polyester film
- Color options: clear, white, black, matte, translucent
- Supply format: rolls, sheets, kiss-cut parts, full-cut parts
- Surface structure: plain, coated, adhesive-backed, liner laminated
- Typical uses: insulation parts, overlays, stencil film, masking, custom components
-
- Material: PET base film
- Finish: clear, matte, or ultra-matte
- Surface Function: anti-smudge and easy-clean
- Thickness: customizable by end use
- Adhesive: silicone, acrylic, OCA, or non-tacky
- Supply Form: jumbo roll, slit roll, or sheet
-
- Material: Polyethylene (PE) base film
- Adhesive Type: Water‑based acrylic / pressure‑sensitive adhesive
- Thickness: 30–120 microns range
- Colors: Transparent, blue, black & white
- Widths: 200–2000 mm customizable
- Roll Lengths: 100–2000 m per roll
-
The COF of PET film describes resistance when a defined surface starts and continues sliding against another surface. This reference applies to uncoated, coated, treated and PET-based protective film used in unwinding, slitting, laminating and die cutting. Each result must be read with its tested sides, method, load and conditioning history. Equipment compatibility, adhesive behavior and removal performance still require sample testing on the actual material and process.
-
- Material:Flame retardant polyester film
- Thickness:25–250 μm typical range
- Color:Clear, milky white, black, or custom
- Flame Rating:UL94 VTM-rated options
- Surface:Untreated, corona treated, or coated
- Use:Battery, motor, transformer, and electronic insulation
