No products were found matching your selection.
Other Related Products
-
A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.
-
- Material: anti-static treated PET polyester film
- Color: clear, transparent, blue tint, or custom color
- Surface option: single-side or double-side treatment
- Thickness: available in multiple converting grades
- Supply form: master rolls, slit rolls, and sheets
- Main use: ESD handling, electronics protection, clean converting
-
- Material: PE or PET protective film
- Color: clear or translucent
- Adhesive type: removable PSA
- Surface focus: overlays and display windows
- Process fit: printing, die cutting, lamination
- Main purpose: temporary surface protection
-
COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…
-
- Material:PET polyester film
- Coating side:Single side, double side, or differential A/B side
- Coating system:Silicone, non-silicone, or fluoropolymer release coating
- Thickness:25–188 μm common range
- Color:Clear, translucent, milky white, or customized appearance
- Release force: 3–150 gf/in, adjusted by adhesive system
-
- Material: Biaxially oriented PET
- Color: Clear or custom tinted
- Thickness: Typically 8-250 um
- Treatment: One-side, two-side, or asymmetric
- Width: Typically 100-2200 mm
- Format: Master rolls, slit rolls, or sheets
-
Plastic films for flooring industry applications should be selected around the actual finish and process stage, not simply because a surface is called hard flooring. Laminate, embossed SPC or LVT, ceramic tile, and sealed stone can react differently to temporary adhesive contact. This solution covers production, handling, transport, installation, and planned removal. Key risks include scratches, trapped contamination, edge lift, film movement, adhesive transfer, haze, and surface change. Selection should consider texture, coating condition, dwell time, environment, traffic, removal timing, and actual trial results.
-
- Material: Coated PET / polyester film
- Common Thickness: 75μm, 100μm, 125μm
- Surface: Matte, semi-matte, or clear coated
- Peel Type: Hot peel, cold peel, warm peel
- Width Range: 30cm, 60cm, 1,000mm, custom slit widths
- Main Use: Heat transfer carrier film for industrial printing and decoration
-
- Material: Fluoro-silicone coated PET film
- Color: Clear, milky white, or customized tone
- Thickness: 50μm, 75μm, 100μm, custom thickness available
- Release side: Single-side or differential release
- Adhesive match: Silicone PSA, silicone tape, soft medical gel adhesive
- Key function: Clean release with controlled peel force
