No products were found matching your selection.

Other Related Products

  • Stone Protection Film

    • Material: PE or PET protective film
    • Color: clear, translucent, black & white
    • Thickness: 50–100 microns typical
    • Adhesive: water-based acrylic or acrylic PSA
    • Width: custom slit rolls and sheet formats
    • Use stage: fabrication, transport, installation, renovation
    Read moreDone

  • Nano Hybrid Glass Screen Protector Film

    • Material: Nano hybrid glass composite
    • Surface: Clear, smooth, oleophobic
    • Hardness: 9H pencil hardness
    • Adhesive: Full-area silicone layer
    • Formats: Sheets, blanks, die-cut parts
    • Uses: Mobile, automotive, industrial displays
    Read moreDone

  • Pa Pe Thermoforming Film

    • Thickness: 60–300 μm
    • Width: 200–1000 mm (custom slit widths available)
    • Structure: PA/PE, PA/EVOH/PE multilayer
    • Color: High clarity, optional light tint
    • Process: Thermoforming, vacuum packaging, MAP
    • Surface: Corona treated / printable
    Read moreDone

  • Anti Fog PET Film

    • Material: Clear PET film with anti-fog coating
    • Color: Transparent / clear
    • Thickness: 50–250 micron
    • Surface: Single-side or double-side anti-fog
    • Format: Roll, sheet, slit roll, die-cut piece
    • Use: Packaging windows, face shields, clear covers
    Read moreDone

  • Appliance Cover Film

    • Material: PE protective film
    • Common thickness: 30–100 microns
    • Standard colors: clear, blue, black & white
    • Adhesion level: low to medium tack
    • Typical widths: 200–1600 mm
    • Main use: temporary appliance surface protection
    Read moreDone

  • Transparent Conductive ITO PET Film

    • Material: Optical-grade PET with single-side ITO coating
    • Color: Clear with a slight blue-gray tint
    • PET thickness: 125, 175, or 200 um
    • Sheet resistance: 10, 60, 100, 200, or 300 ohm/sq
    • Supply form: Rolls, sheets, slit rolls, or converted parts
    • Main uses: Touch electrodes, transparent heating, and EMI/RFI shielding
    Read moreDone

  • PET Film Electrical Insulation

    • Material: Electrical grade PET film / polyester film
    • Thickness:25–350 micron
    • Color:Clear, white, black, blue, or custom color
    • Surface:Smooth, corona-treated, coated, or laminated
    • Format:Jumbo roll, slit roll, sheet, strip, die-cut part
    • Use:Motor, transformer, coil, cable, battery, electronics
    Read moreDone

  • Protective Film for Electronics Shipping: Surface, ESD and Removal Validation

    A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.

    Read moreDone

  • Plastic Film for Injection Molding

    • Materials: PC, PET, acrylic, or multilayer film
    • Thickness: Common project range 125-500 um
    • Appearance: Clear, tinted, translucent, printed, or metallic
    • Finish: Gloss, matte, textured, or formable coated surface
    • Supply: Rolls, sheets, printed blanks, or preformed inserts
    • Process: Printing, forming, trimming, and back-injection
    Read moreDone