No products were found matching your selection.

Other Related Products

  • Protective Film for Electronics Shipping: Surface, ESD and Removal Validation

    A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.

    Read moreDone

  • Sheet Metal Protective Film

    • Material: PE protective film
    • Color: Clear, blue, black & white
    • Thickness: 40–100 microns
    • Adhesion: Low, medium, high tack
    • Roll Width: 50–1240 mm
    • Use Stage: Processing, storage, transit, installation
    Read moreDone

  • Chemically Treated PET Film

    • Material: Biaxially oriented PET
    • Color: Clear or custom tinted
    • Thickness: Typically 8-250 um
    • Treatment: One-side, two-side, or asymmetric
    • Width: Typically 100-2200 mm
    • Format: Master rolls, slit rolls, or sheets
    Read moreDone

  • Transparent Conductive ITO PET Film

    • Material: Optical-grade PET with single-side ITO coating
    • Color: Clear with a slight blue-gray tint
    • PET thickness: 125, 175, or 200 um
    • Sheet resistance: 10, 60, 100, 200, or 300 ohm/sq
    • Supply form: Rolls, sheets, slit rolls, or converted parts
    • Main uses: Touch electrodes, transparent heating, and EMI/RFI shielding
    Read moreDone

  • PET Film Electrical Insulation

    • Material: Electrical grade PET film / polyester film
    • Thickness:25–350 micron
    • Color:Clear, white, black, blue, or custom color
    • Surface:Smooth, corona-treated, coated, or laminated
    • Format:Jumbo roll, slit roll, sheet, strip, die-cut part
    • Use:Motor, transformer, coil, cable, battery, electronics
    Read moreDone

  • Super Matte Finished PET Film

    • Material:BOPET / polyester film
    • Finish:Super matte, low gloss
    • Thickness:12–100 μm, common range
    • Width:500–2050 mm, slit roll available
    • Color:Clear, translucent, white, or matte metallized
    • Use:Printing, lamination, labels, packaging, decorative surfaces
    Read moreDone
  • Placeholder

    Furniture Board Protective Film

    • Material: Removable PE film with acrylic adhesive
    • Color: Clear, blue, black and white, or printed
    • Thickness: Commonly 30-80 um; extended grades subject to review
    • Width: Custom slit widths for panel lines
    • Roll format: Machine-length or jumbo rolls
    • Surfaces: MDF, melamine, cabinet, and decorative boards
    Read moreDone

  • Polyester Film Uv Resistance

    • Material: Biaxially oriented polyester (BOPET)
    • Thickness: Available in custom thicknesses ranging from 0.05mm to 0.5mm
    • Color: Clear, with options for custom tinting
    • UV Resistance: High-level UV blocking and stabilizer additives
    • Durability: Excellent resistance to weathering, chemicals, and abrasion
    • Applications: Suitable for outdoor signage, protective overlays, and solar back sheets
    Read moreDone

  • Flame Retardant PET Film

    • Material:Flame retardant polyester film
    • Thickness:25–250 μm typical range
    • Color:Clear, milky white, black, or custom
    • Flame Rating:UL94 VTM-rated options
    • Surface:Untreated, corona treated, or coated
    • Use:Battery, motor, transformer, and electronic insulation
    Read moreDone