No products were found matching your selection.
Other Related Products
-
- Material: Optical-grade PET with single-side ITO coating
- Color: Clear with a slight blue-gray tint
- PET thickness: 125, 175, or 200 um
- Sheet resistance: 10, 60, 100, 200, or 300 ohm/sq
- Supply form: Rolls, sheets, slit rolls, or converted parts
- Main uses: Touch electrodes, transparent heating, and EMI/RFI shielding
-
- Material: PET / BoPET polyester film
- Common thickness: 12–250 microns
- Color options: clear, milky white, matte, black
- Surface options: plain, corona treated, coated
- Supply format: jumbo roll, slit roll, sheet, die-cut
- Main uses: insulation, laminates, labels, protection
-
- Material:BOPET / polyester film
- Finish:Super matte, low gloss
- Thickness:12–100 μm, common range
- Width:500–2050 mm, slit roll available
- Color:Clear, translucent, white, or matte metallized
- Use:Printing, lamination, labels, packaging, decorative surfaces
-
- Thickness: 60–300 μm
- Width: 200–1000 mm (custom slit widths available)
- Structure: PA/PE, PA/EVOH/PE multilayer
- Color: High clarity, optional light tint
- Process: Thermoforming, vacuum packaging, MAP
- Surface: Corona treated / printable
-
COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…
-
- Base Material: Clear or blue PET film
- Coating Type: Silicone-free release coating
- Common Thickness: 25μm, 36μm, 50μm, 75μm, 100μm, 125μm
- Release Force: 5–30 g/in, 30–80 g/in, 80–150 g/in options
- Roll Format: Narrow slit rolls or master rolls, 3 inch or 6 inch cor
- Main Uses: OCA, electronics die cutting, medical adhesive tape, precision adhesive converting
-
- Material: Fluoro-silicone coated PET film
- Color: Clear, milky white, or customized tone
- Thickness: 50μm, 75μm, 100μm, custom thickness available
- Release side: Single-side or differential release
- Adhesive match: Silicone PSA, silicone tape, soft medical gel adhesive
- Key function: Clean release with controlled peel force
-
Plastic films for flooring industry applications should be selected around the actual finish and process stage, not simply because a surface is called hard flooring. Laminate, embossed SPC or LVT, ceramic tile, and sealed stone can react differently to temporary adhesive contact. This solution covers production, handling, transport, installation, and planned removal. Key risks include scratches, trapped contamination, edge lift, film movement, adhesive transfer, haze, and surface change. Selection should consider texture, coating condition, dwell time, environment, traffic, removal timing, and actual trial results.
-
Polyester film shelf life depends on construction, packaging integrity, storage history, and retained properties. This reference covers plain, treated, coated, and adhesive-coated PET protective film. Use grade-specific limits. Inspect uncertain stock against approved data and confirm it by representative sample testing before full use.
