No products were found matching your selection.
Other Related Products
-
- Material: Removable PE film with acrylic adhesive
- Color: Clear, blue, black and white, or printed
- Thickness: Commonly 30-80 um; extended grades subject to review
- Width: Custom slit widths for panel lines
- Roll format: Machine-length or jumbo rolls
- Surfaces: MDF, melamine, cabinet, and decorative boards
-
- Film: PE or PET
- Colors: clear, blue, milky white
- Tack: low or medium
- Surfaces: mirror face, mirror backing
- Supply: slit rolls or jumbo rolls
- Use: cutting, edging, storage, transport
-
- Material: PE protective film
- Color: Clear, blue, black & white
- Thickness: 40–100 microns
- Adhesion: Low, medium, high tack
- Roll Width: 50–1240 mm
- Use Stage: Processing, storage, transit, installation
-
- Material: Polyethylene (PE) protective film
- Thickness: 30–100 microns (custom available)
- Adhesion: Low to medium tack, surface-adjustable
- Color: Transparent, blue, black/white, custom colors
- Width: 50mm–1200mm (custom slitting supported)
- Length: 50m–2000m (jumbo roll supply available)
-
The COF of PET film describes resistance when a defined surface starts and continues sliding against another surface. This reference applies to uncoated, coated, treated and PET-based protective film used in unwinding, slitting, laminating and die cutting. Each result must be read with its tested sides, method, load and conditioning history. Equipment compatibility, adhesive behavior and removal performance still require sample testing on the actual material and process.
-
- Material: Polyester (PET) base film
- Surface: Scratch-resistant or hard-coated
- Thickness: Common custom range 20–120 μm
- Finish: Clear, matte, or anti-glare optional
- Adhesion: Controlled low, medium, or high peel
- Supply Form: Roll, sheet, or die-cut parts
-
- Materials: PC, PET, acrylic, or multilayer film
- Thickness: Common project range 125-500 um
- Appearance: Clear, tinted, translucent, printed, or metallic
- Finish: Gloss, matte, textured, or formable coated surface
- Supply: Rolls, sheets, printed blanks, or preformed inserts
- Process: Printing, forming, trimming, and back-injection
-
- Material: Optical-grade PET with single-side ITO coating
- Color: Clear with a slight blue-gray tint
- PET thickness: 125, 175, or 200 um
- Sheet resistance: 10, 60, 100, 200, or 300 ohm/sq
- Supply form: Rolls, sheets, slit rolls, or converted parts
- Main uses: Touch electrodes, transparent heating, and EMI/RFI shielding
-
- Material: PET / BoPET polyester film
- Common thickness: 12–250 microns
- Color options: clear, milky white, matte, black
- Surface options: plain, corona treated, coated
- Supply format: jumbo roll, slit roll, sheet, die-cut
- Main uses: insulation, laminates, labels, protection
