No products were found matching your selection.

Other Related Products

  • Plastic Film for Injection Molding

    • Materials: PC, PET, acrylic, or multilayer film
    • Thickness: Common project range 125-500 um
    • Appearance: Clear, tinted, translucent, printed, or metallic
    • Finish: Gloss, matte, textured, or formable coated surface
    • Supply: Rolls, sheets, printed blanks, or preformed inserts
    • Process: Printing, forming, trimming, and back-injection
    Read moreDone

  • Pa Pe Thermoforming Film

    • Thickness: 60–300 μm
    • Width: 200–1000 mm (custom slit widths available)
    • Structure: PA/PE, PA/EVOH/PE multilayer
    • Color: High clarity, optional light tint
    • Process: Thermoforming, vacuum packaging, MAP
    • Surface: Corona treated / printable
    Read moreDone

  • Sheet Metal Protective Film

    • Material: PE protective film
    • Color: Clear, blue, black & white
    • Thickness: 40–100 microns
    • Adhesion: Low, medium, high tack
    • Roll Width: 50–1240 mm
    • Use Stage: Processing, storage, transit, installation
    Read moreDone

  • Non Silicone Release Liner

    • Base Material: Clear or blue PET film
    • Coating Type: Silicone-free release coating
    • Common Thickness: 25μm, 36μm, 50μm, 75μm, 100μm, 125μm
    • Release Force: 5–30 g/in, 30–80 g/in, 80–150 g/in options
    • Roll Format: Narrow slit rolls or master rolls, 3 inch or 6 inch cor
    • Main Uses: OCA, electronics die cutting, medical adhesive tape, precision adhesive converting
    Read moreDone

  • Release Liner For Silicone Adhesive

    • Material: Fluoro-silicone coated PET film
    • Color: Clear, milky white, or customized tone
    • Thickness: 50μm, 75μm, 100μm, custom thickness available
    • Release side: Single-side or differential release
    • Adhesive match: Silicone PSA, silicone tape, soft medical gel adhesive
    • Key function: Clean release with controlled peel force
    Read moreDone

  • PET Film for Heat Transfer Printing

    • Material: Coated PET / polyester film
    • Common Thickness: 75μm, 100μm, 125μm
    • Surface: Matte, semi-matte, or clear coated
    • Peel Type: Hot peel, cold peel, warm peel
    • Width Range: 30cm, 60cm, 1,000mm, custom slit widths
    • Main Use: Heat transfer carrier film for industrial printing and decoration
    Read moreDone

  • Polyester Film Melting Temperature Technical Data

    Conventional PET and BOPET films commonly show a polyester film melting temperature of about 245-260 C by DSC. The reported onset, peak, or endset varies with grade, orientation, thermal history, and scan conditions. Use it for base-film identification, not as a finished-film service limit. Confirm adhesive, coating, surface, dwell, and removal behavior under intended conditions.

    Read moreDone

  • Plastic Films for Flooring Industry: Surface Protection During Production & Installation

    Plastic films for flooring industry applications should be selected around the actual finish and process stage, not simply because a surface is called hard flooring. Laminate, embossed SPC or LVT, ceramic tile, and sealed stone can react differently to temporary adhesive contact. This solution covers production, handling, transport, installation, and planned removal. Key risks include scratches, trapped contamination, edge lift, film movement, adhesive transfer, haze, and surface change. Selection should consider texture, coating condition, dwell time, environment, traffic, removal timing, and actual trial results.

    Read moreDone

  • Pet Anti Scratch Film

    • Material: Polyester (PET) base film
    • Surface: Scratch-resistant or hard-coated
    • Thickness: Common custom range 20–120 μm
    • Finish: Clear, matte, or anti-glare optional
    • Adhesion: Controlled low, medium, or high peel
    • Supply Form: Roll, sheet, or die-cut parts
    Read moreDone