No products were found matching your selection.
Other Related Products
-
- Material: Fluoro-silicone coated PET film
- Color: Clear, milky white, or customized tone
- Thickness: 50μm, 75μm, 100μm, custom thickness available
- Release side: Single-side or differential release
- Adhesive match: Silicone PSA, silicone tape, soft medical gel adhesive
- Key function: Clean release with controlled peel force
-
- Material: Biaxially oriented polyester (BOPET)
- Thickness: Available in custom thicknesses ranging from 0.05mm to 0.5mm
- Color: Clear, with options for custom tinting
- UV Resistance: High-level UV blocking and stabilizer additives
- Durability: Excellent resistance to weathering, chemicals, and abrasion
- Applications: Suitable for outdoor signage, protective overlays, and solar back sheets
-
- Thickness: 60–300 μm
- Width: 200–1000 mm (custom slit widths available)
- Structure: PA/PE, PA/EVOH/PE multilayer
- Color: High clarity, optional light tint
- Process: Thermoforming, vacuum packaging, MAP
- Surface: Corona treated / printable
-
- Material: Polyester (PET) base film
- Surface: Scratch-resistant or hard-coated
- Thickness: Common custom range 20–120 μm
- Finish: Clear, matte, or anti-glare optional
- Adhesion: Controlled low, medium, or high peel
- Supply Form: Roll, sheet, or die-cut parts
-
- Film: PE or PET
- Colors: clear, blue, milky white
- Tack: low or medium
- Surfaces: mirror face, mirror backing
- Supply: slit rolls or jumbo rolls
- Use: cutting, edging, storage, transport
-
- Material: PE protective film
- Common thickness: 30–100 microns
- Standard colors: clear, blue, black & white
- Adhesion level: low to medium tack
- Typical widths: 200–1600 mm
- Main use: temporary appliance surface protection
-
- Material:PET polyester film
- Coating side:Single side, double side, or differential A/B side
- Coating system:Silicone, non-silicone, or fluoropolymer release coating
- Thickness:25–188 μm common range
- Color:Clear, translucent, milky white, or customized appearance
- Release force: 3–150 gf/in, adjusted by adhesive system
-
Conventional PET and BOPET films commonly show a polyester film melting temperature of about 245-260 C by DSC. The reported onset, peak, or endset varies with grade, orientation, thermal history, and scan conditions. Use it for base-film identification, not as a finished-film service limit. Confirm adhesive, coating, surface, dwell, and removal behavior under intended conditions.
-
- Material: Biaxially oriented PET
- Color: Natural clear
- Thickness: Typical reference 12-250 um
- Formats: Master rolls, slit rolls, cut sheets
- Surface: Untreated or basic treated options
- Uses: Printing, lamination, packaging, graphics
