No products were found matching your selection.
Other Related Products
-
- Common thickness: 12–250 microns
- Material type: PET / polyester film
- Color options: clear, white, black, matte, translucent
- Supply format: rolls, sheets, kiss-cut parts, full-cut parts
- Surface structure: plain, coated, adhesive-backed, liner laminated
- Typical uses: insulation parts, overlays, stencil film, masking, custom components
-
- Material: PET polyester film
- Color options: clear, matte, white, black, or custom
- Common thickness: approx. 25–250 microns
- Supply format: die cut pieces, kiss-cut sheets, or roll form
- Adhesive option: single-sided, double-sided, or non-adhesive
- Liner option: paper liner, film liner, or differential release liner
-
- Base Material: Clear or blue PET film
- Coating Type: Silicone-free release coating
- Common Thickness: 25μm, 36μm, 50μm, 75μm, 100μm, 125μm
- Release Force: 5–30 g/in, 30–80 g/in, 80–150 g/in options
- Roll Format: Narrow slit rolls or master rolls, 3 inch or 6 inch cor
- Main Uses: OCA, electronics die cutting, medical adhesive tape, precision adhesive converting
-
The COF of PET film describes resistance when a defined surface starts and continues sliding against another surface. This reference applies to uncoated, coated, treated and PET-based protective film used in unwinding, slitting, laminating and die cutting. Each result must be read with its tested sides, method, load and conditioning history. Equipment compatibility, adhesive behavior and removal performance still require sample testing on the actual material and process.
-
- Material:Glassine paper, kraft paper, PE coated paper, or PET film
- Color:White, yellow, blue, clear, or custom color
- Thickness:Paper 40–120gsm; PET film 25–75μm
- Release Side:One-side or two-side silicone coating
- Format:Jumbo roll, slit roll, sheet liner, or custom width
- Use:Sticker rolls, kiss-cut sheets, printed stickers, and labels
-
- Material: Clear PET film with anti-fog coating
- Color: Transparent / clear
- Thickness: 50–250 micron
- Surface: Single-side or double-side anti-fog
- Format: Roll, sheet, slit roll, die-cut piece
- Use: Packaging windows, face shields, clear covers
-
A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.
-
- Roll Widths: 300–1,400 mm (custom to 1,350mm)
- Roll Length: Adjustable, typically 200–400 m
- MOQ: As low as 100 kg (≈500 kg for certain grades)
Customizable Enhancements:
- Anti-scratch or anti-fog coatings
- UV stabilization or conductive/ESD treatment
- Surface corona for improved printability
-
- Brand: PET Film Supply Company
- Manufacturer: Protective film for aluminium profiles manufacturer
- Material: High-quality polyethylene (PE) or PVC
- Thickness: 50–150 microns
- Color: Transparent or white
- Adhesive Type: Pressure-sensitive, residue-free
- UV Resistance: Optional, UV-stable for outdoor use
