No products were found matching your selection.

Other Related Products

  • Non Silicone Release Liner

    • Base Material: Clear or blue PET film
    • Coating Type: Silicone-free release coating
    • Common Thickness: 25μm, 36μm, 50μm, 75μm, 100μm, 125μm
    • Release Force: 5–30 g/in, 30–80 g/in, 80–150 g/in options
    • Roll Format: Narrow slit rolls or master rolls, 3 inch or 6 inch cor
    • Main Uses: OCA, electronics die cutting, medical adhesive tape, precision adhesive converting
    Read moreDone

  • PET Protective Film for Anti Fingerprint

    • Material: PET base film
    • Finish: clear, matte, or ultra-matte
    • Surface Function: anti-smudge and easy-clean
    • Thickness: customizable by end use
    • Adhesive: silicone, acrylic, OCA, or non-tacky
    • Supply Form: jumbo roll, slit roll, or sheet
    Read moreDone

  • Appliance Cover Film

    • Material: PE protective film
    • Common thickness: 30–100 microns
    • Standard colors: clear, blue, black & white
    • Adhesion level: low to medium tack
    • Typical widths: 200–1600 mm
    • Main use: temporary appliance surface protection
    Read moreDone

  • Transparent PET Film

    • Material: Polyethylene Terephthalate (PET)
    • Color: Transparent, Clear
    • Thickness: Ranges from 0.025mm to 0.5mm
    • Width: Customizable according to client requirements
    • Application: Used for packaging, insulation, graphics, and protective films
    • Packaging: Roll, sheet, or customized packaging options available
    Read moreDone

  • PET Film Electrical Insulation

    • Material: Electrical grade PET film / polyester film
    • Thickness:25–350 micron
    • Color:Clear, white, black, blue, or custom color
    • Surface:Smooth, corona-treated, coated, or laminated
    • Format:Jumbo roll, slit roll, sheet, strip, die-cut part
    • Use:Motor, transformer, coil, cable, battery, electronics
    Read moreDone

  • COF of PET Film

    COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…

    Read moreDone

  • Release Coating Polyester Film

    • Material:PET polyester film
    • Coating side:Single side, double side, or differential A/B side
    • Coating system:Silicone, non-silicone, or fluoropolymer release coating
    • Thickness:25–188 μm common range
    • Color:Clear, translucent, milky white, or customized appearance
    • Release force: 3–150 gf/in, adjusted by adhesive system
    Read moreDone

  • Release Liner For Stickers

    • Material:Glassine paper, kraft paper, PE coated paper, or PET film
    • Color:White, yellow, blue, clear, or custom color
    • Thickness:Paper 40–120gsm; PET film 25–75μm
    • Release Side:One-side or two-side silicone coating
    • Format:Jumbo roll, slit roll, sheet liner, or custom width
    • Use:Sticker rolls, kiss-cut sheets, printed stickers, and labels
    Read moreDone

  • Sheet Metal Protective Film

    • Material: PE protective film
    • Color: Clear, blue, black & white
    • Thickness: 40–100 microns
    • Adhesion: Low, medium, high tack
    • Roll Width: 50–1240 mm
    • Use Stage: Processing, storage, transit, installation
    Read moreDone