No products were found matching your selection.
Other Related Products
-
The COF of PET film describes resistance when a defined surface starts and continues sliding against another surface. This reference applies to uncoated, coated, treated and PET-based protective film used in unwinding, slitting, laminating and die cutting. Each result must be read with its tested sides, method, load and conditioning history. Equipment compatibility, adhesive behavior and removal performance still require sample testing on the actual material and process.
-
- Material: Polyester (PET) base film
- Surface: Scratch-resistant or hard-coated
- Thickness: Common custom range 20–120 μm
- Finish: Clear, matte, or anti-glare optional
- Adhesion: Controlled low, medium, or high peel
- Supply Form: Roll, sheet, or die-cut parts
-
- Material:Glassine paper, kraft paper, PE coated paper, or PET film
- Color:White, yellow, blue, clear, or custom color
- Thickness:Paper 40–120gsm; PET film 25–75μm
- Release Side:One-side or two-side silicone coating
- Format:Jumbo roll, slit roll, sheet liner, or custom width
- Use:Sticker rolls, kiss-cut sheets, printed stickers, and labels
-
A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.
-
- Base Material: Clear or blue PET film
- Coating Type: Silicone-free release coating
- Common Thickness: 25μm, 36μm, 50μm, 75μm, 100μm, 125μm
- Release Force: 5–30 g/in, 30–80 g/in, 80–150 g/in options
- Roll Format: Narrow slit rolls or master rolls, 3 inch or 6 inch cor
- Main Uses: OCA, electronics die cutting, medical adhesive tape, precision adhesive converting
-
- Material: Polyethylene (PE) protective film
- Thickness: 30–100 microns (custom available)
- Adhesion: Low to medium tack, surface-adjustable
- Color: Transparent, blue, black/white, custom colors
- Width: 50mm–1200mm (custom slitting supported)
- Length: 50m–2000m (jumbo roll supply available)
-
- Material: Clear PET film with anti-fog coating
- Color: Transparent / clear
- Thickness: 50–250 micron
- Surface: Single-side or double-side anti-fog
- Format: Roll, sheet, slit roll, die-cut piece
- Use: Packaging windows, face shields, clear covers
-
- Material: PE film with removable acrylic adhesive
- Thickness: 50 um, 60 um, 80 um, 100 um
- Width: 600 mm, 900 mm, 1200 mm, or slit width
- Color: clear, blue, milky white, or printed
- Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
- Use: protects laminate planks during installation and handover
-
- Material: anti-static treated PET polyester film
- Color: clear, transparent, blue tint, or custom color
- Surface option: single-side or double-side treatment
- Thickness: available in multiple converting grades
- Supply form: master rolls, slit rolls, and sheets
- Main use: ESD handling, electronics protection, clean converting
