No products were found matching your selection.

Other Related Products

  • Corona Treatment PET Film

    • Material: BOPET / polyester film
    • Surface Treatment: One-side or both-side corona
    • Thickness: 8–75 microns
    • Appearance: Clear, clean, smooth
    • Treated Side: Commonly 50–52+ dyn/cm
    • Use: Printing, coating, lamination, tape, metallizing
    Read moreDone

  • Transparent Conductive ITO PET Film

    • Material: Optical-grade PET with single-side ITO coating
    • Color: Clear with a slight blue-gray tint
    • PET thickness: 125, 175, or 200 um
    • Sheet resistance: 10, 60, 100, 200, or 300 ohm/sq
    • Supply form: Rolls, sheets, slit rolls, or converted parts
    • Main uses: Touch electrodes, transparent heating, and EMI/RFI shielding
    Read moreDone

  • Release Liner For Silicone Adhesive

    • Material: Fluoro-silicone coated PET film
    • Color: Clear, milky white, or customized tone
    • Thickness: 50μm, 75μm, 100μm, custom thickness available
    • Release side: Single-side or differential release
    • Adhesive match: Silicone PSA, silicone tape, soft medical gel adhesive
    • Key function: Clean release with controlled peel force
    Read moreDone

  • Siliconized Film Release Liners

    • Material: PET film with siliconized release surface
    • Thickness: 25 / 36 / 50 / 75 / 100 micron
    • Color: Clear, milky white, blue tint or customized
    • Release Type: Single-side, double-side or differential release
    • Roll Form: Jumbo roll or slit roll
    • Main Uses: Labels, tapes, die-cut parts, PSA lamination
    Read moreDone

  • Custom Die Cut Pet Films

    • Material: PET polyester film
    • Color options: clear, matte, white, black, or custom
    • Common thickness: approx. 25–250 microns
    • Supply format: die cut pieces, kiss-cut sheets, or roll form
    • Adhesive option: single-sided, double-sided, or non-adhesive
    • Liner option: paper liner, film liner, or differential release liner
    Read moreDone
  • Placeholder

    Protective Film for Mirrors

    • Film: PE or PET
    • Colors: clear, blue, milky white
    • Tack: low or medium
    • Surfaces: mirror face, mirror backing
    • Supply: slit rolls or jumbo rolls
    • Use: cutting, edging, storage, transport
    Read moreDone

  • Protective Film for Aluminium Composite Panel

    • Material: Polyethylene (PE) base film
    • Adhesive Type: Water‑based acrylic / pressure‑sensitive adhesive
    • Thickness: 30–120 microns range
    • Colors: Transparent, blue, black & white
    • Widths: 200–2000 mm customizable
    • Roll Lengths: 100–2000 m per roll
    Read moreDone

  • Protective Film for Electronics Shipping: Surface, ESD and Removal Validation

    A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.

    Read moreDone
  • Placeholder

    Furniture Board Protective Film

    • Material: Removable PE film with acrylic adhesive
    • Color: Clear, blue, black and white, or printed
    • Thickness: Commonly 30-80 um; extended grades subject to review
    • Width: Custom slit widths for panel lines
    • Roll format: Machine-length or jumbo rolls
    • Surfaces: MDF, melamine, cabinet, and decorative boards
    Read moreDone