No products were found matching your selection.
Other Related Products
-
- Material: Polyethylene (PE) protective film
- Thickness: 30–100 microns (custom available)
- Adhesion: Low to medium tack, surface-adjustable
- Color: Transparent, blue, black/white, custom colors
- Width: 50mm–1200mm (custom slitting supported)
- Length: 50m–2000m (jumbo roll supply available)
-
- Material: PET polyester film
- Color options: clear, matte, white, black, or custom
- Common thickness: approx. 25–250 microns
- Supply format: die cut pieces, kiss-cut sheets, or roll form
- Adhesive option: single-sided, double-sided, or non-adhesive
- Liner option: paper liner, film liner, or differential release liner
-
- Brand: PET Film Supply Company
- Manufacturer: Protective film for aluminium profiles manufacturer
- Material: High-quality polyethylene (PE) or PVC
- Thickness: 50–150 microns
- Color: Transparent or white
- Adhesive Type: Pressure-sensitive, residue-free
- UV Resistance: Optional, UV-stable for outdoor use
-
- Material: Polyester (PET) base film
- Surface: Scratch-resistant or hard-coated
- Thickness: Common custom range 20–120 μm
- Finish: Clear, matte, or anti-glare optional
- Adhesion: Controlled low, medium, or high peel
- Supply Form: Roll, sheet, or die-cut parts
-
Plastic film for appliance touch controls is used to protect appearance-sensitive interfaces while glass, printed overlays, display windows, decorative panels, and surrounding housings move through manufacturing. The challenge is not simply preventing scratches. A film can introduce a new problem if its adhesion is mismatched, contamination is trapped beneath it, an edge lifts near a cutout, or the temporary layer changes a capacitive touch check. This solution focuses on surface identification, controlled application, sample validation, film-on versus film-off functional checks, planned removal, and failure diagnosis before full production use.
-
A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.
-
- Material:Flame retardant polyester film
- Thickness:25–250 μm typical range
- Color:Clear, milky white, black, or custom
- Flame Rating:UL94 VTM-rated options
- Surface:Untreated, corona treated, or coated
- Use:Battery, motor, transformer, and electronic insulation
-
- Material: Coated PET / polyester film
- Common Thickness: 75μm, 100μm, 125μm
- Surface: Matte, semi-matte, or clear coated
- Peel Type: Hot peel, cold peel, warm peel
- Width Range: 30cm, 60cm, 1,000mm, custom slit widths
- Main Use: Heat transfer carrier film for industrial printing and decoration
-
- Material: Electrical grade PET film / polyester film
- Thickness:25–350 micron
- Color:Clear, white, black, blue, or custom color
- Surface:Smooth, corona-treated, coated, or laminated
- Format:Jumbo roll, slit roll, sheet, strip, die-cut part
- Use:Motor, transformer, coil, cable, battery, electronics
