No products were found matching your selection.

Other Related Products

  • Release Coating Polyester Film

    • Material:PET polyester film
    • Coating side:Single side, double side, or differential A/B side
    • Coating system:Silicone, non-silicone, or fluoropolymer release coating
    • Thickness:25–188 μm common range
    • Color:Clear, translucent, milky white, or customized appearance
    • Release force: 3–150 gf/in, adjusted by adhesive system
    Read moreDone

  • Plastic Film For Injection Molding

    • Material: PC, PE, PMMA, or multi-layer film
    • Finish: gloss, matte, textured, anti-glare, or printed
    • Color: clear, tinted, white, black, or custom
    • Thickness: selected by forming depth and geometry
    • Process: printing, thermoforming, trimming, and back-injection
    • Use: IMD, FIM, HMI panels, trim parts, and decorative housings
    Read moreDone

  • Release Liner For Stickers

    • Material:Glassine paper, kraft paper, PE coated paper, or PET film
    • Color:White, yellow, blue, clear, or custom color
    • Thickness:Paper 40–120gsm; PET film 25–75μm
    • Release Side:One-side or two-side silicone coating
    • Format:Jumbo roll, slit roll, sheet liner, or custom width
    • Use:Sticker rolls, kiss-cut sheets, printed stickers, and labels
    Read moreDone

  • Non Silicone Release Liner

    • Base Material: Clear or blue PET film
    • Coating Type: Silicone-free release coating
    • Common Thickness: 25μm, 36μm, 50μm, 75μm, 100μm, 125μm
    • Release Force: 5–30 g/in, 30–80 g/in, 80–150 g/in options
    • Roll Format: Narrow slit rolls or master rolls, 3 inch or 6 inch cor
    • Main Uses: OCA, electronics die cutting, medical adhesive tape, precision adhesive converting
    Read moreDone

  • Corona Treatment PET Film

    • Material: BOPET / polyester film
    • Surface Treatment: One-side or both-side corona
    • Thickness: 8–75 microns
    • Appearance: Clear, clean, smooth
    • Treated Side: Commonly 50–52+ dyn/cm
    • Use: Printing, coating, lamination, tape, metallizing
    Read moreDone

  • PET Film for Heat Transfer Printing

    • Material: Coated PET / polyester film
    • Common Thickness: 75μm, 100μm, 125μm
    • Surface: Matte, semi-matte, or clear coated
    • Peel Type: Hot peel, cold peel, warm peel
    • Width Range: 30cm, 60cm, 1,000mm, custom slit widths
    • Main Use: Heat transfer carrier film for industrial printing and decoration
    Read moreDone

  • Pet Anti Scratch Film

    • Material: Polyester (PET) base film
    • Surface: Scratch-resistant or hard-coated
    • Thickness: Common custom range 20–120 μm
    • Finish: Clear, matte, or anti-glare optional
    • Adhesion: Controlled low, medium, or high peel
    • Supply Form: Roll, sheet, or die-cut parts
    Read moreDone

  • Pet Thermoforming Film

    • Roll Widths: 300–1,400 mm (custom to 1,350mm)
    • Roll Length: Adjustable, typically 200–400 m
    • MOQ: As low as 100 kg (≈500 kg for certain grades)

    Customizable Enhancements:

    • Anti-scratch or anti-fog coatings
    • UV stabilization or conductive/ESD treatment
    • Surface corona for improved printability
    Read moreDone

  • Laminate Floor Protection Film

    • Material: PE film with removable acrylic adhesive
    • Thickness: 50 um, 60 um, 80 um, 100 um
    • Width: 600 mm, 900 mm, 1200 mm, or slit width
    • Color: clear, blue, milky white, or printed
    • Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
    • Use: protects laminate planks during installation and handover
    Read moreDone