No products were found matching your selection.

Other Related Products

  • Corona Treatment PET Film

    • Material: BOPET / polyester film
    • Surface Treatment: One-side or both-side corona
    • Thickness: 8–75 microns
    • Appearance: Clear, clean, smooth
    • Treated Side: Commonly 50–52+ dyn/cm
    • Use: Printing, coating, lamination, tape, metallizing
    Read moreDone

  • PET Film for Heat Transfer Printing

    • Material: Coated PET / polyester film
    • Common Thickness: 75μm, 100μm, 125μm
    • Surface: Matte, semi-matte, or clear coated
    • Peel Type: Hot peel, cold peel, warm peel
    • Width Range: 30cm, 60cm, 1,000mm, custom slit widths
    • Main Use: Heat transfer carrier film for industrial printing and decoration
    Read moreDone

  • Flame Retardant PET Film

    • Material:Flame retardant polyester film
    • Thickness:25–250 μm typical range
    • Color:Clear, milky white, black, or custom
    • Flame Rating:UL94 VTM-rated options
    • Surface:Untreated, corona treated, or coated
    • Use:Battery, motor, transformer, and electronic insulation
    Read moreDone

  • Release Liner For Stickers

    • Material:Glassine paper, kraft paper, PE coated paper, or PET film
    • Color:White, yellow, blue, clear, or custom color
    • Thickness:Paper 40–120gsm; PET film 25–75μm
    • Release Side:One-side or two-side silicone coating
    • Format:Jumbo roll, slit roll, sheet liner, or custom width
    • Use:Sticker rolls, kiss-cut sheets, printed stickers, and labels
    Read moreDone

  • Pa Pe Thermoforming Film

    • Thickness: 60–300 μm
    • Width: 200–1000 mm (custom slit widths available)
    • Structure: PA/PE, PA/EVOH/PE multilayer
    • Color: High clarity, optional light tint
    • Process: Thermoforming, vacuum packaging, MAP
    • Surface: Corona treated / printable
    Read moreDone

  • Laminate Floor Protection Film

    • Material: PE film with removable acrylic adhesive
    • Thickness: 50 um, 60 um, 80 um, 100 um
    • Width: 600 mm, 900 mm, 1200 mm, or slit width
    • Color: clear, blue, milky white, or printed
    • Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
    • Use: protects laminate planks during installation and handover
    Read moreDone

  • High-performance Membrane Switch Protection Film

    • Material: PE or PET protective film
    • Color: clear or translucent
    • Adhesive type: removable PSA
    • Surface focus: overlays and display windows
    • Process fit: printing, die cutting, lamination
    • Main purpose: temporary surface protection
    Read moreDone
  • Placeholder

    Furniture Board Protective Film

    • Material: Removable PE film with acrylic adhesive
    • Color: Clear, blue, black and white, or printed
    • Thickness: Commonly 30-80 um; extended grades subject to review
    • Width: Custom slit widths for panel lines
    • Roll format: Machine-length or jumbo rolls
    • Surfaces: MDF, melamine, cabinet, and decorative boards
    Read moreDone

  • Siliconized Film Release Liners

    • Material: PET film with siliconized release surface
    • Thickness: 25 / 36 / 50 / 75 / 100 micron
    • Color: Clear, milky white, blue tint or customized
    • Release Type: Single-side, double-side or differential release
    • Roll Form: Jumbo roll or slit roll
    • Main Uses: Labels, tapes, die-cut parts, PSA lamination
    Read moreDone