No products were found matching your selection.
Other Related Products
-
- Material: PE film with removable acrylic adhesive
- Thickness: 50 um, 60 um, 80 um, 100 um
- Width: 600 mm, 900 mm, 1200 mm, or slit width
- Color: clear, blue, milky white, or printed
- Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
- Use: protects laminate planks during installation and handover
-
- Material: BOPET / polyester film
- Surface Treatment: One-side or both-side corona
- Thickness: 8–75 microns
- Appearance: Clear, clean, smooth
- Treated Side: Commonly 50–52+ dyn/cm
- Use: Printing, coating, lamination, tape, metallizing
-
- Roll Widths: 300–1,400 mm (custom to 1,350mm)
- Roll Length: Adjustable, typically 200–400 m
- MOQ: As low as 100 kg (≈500 kg for certain grades)
Customizable Enhancements:
- Anti-scratch or anti-fog coatings
- UV stabilization or conductive/ESD treatment
- Surface corona for improved printability
-
- Materials: PC, PET, acrylic, or multilayer film
- Thickness: Common project range 125-500 um
- Appearance: Clear, tinted, translucent, printed, or metallic
- Finish: Gloss, matte, textured, or formable coated surface
- Supply: Rolls, sheets, printed blanks, or preformed inserts
- Process: Printing, forming, trimming, and back-injection
-
- Material: Electrical grade PET film / polyester film
- Thickness:25–350 micron
- Color:Clear, white, black, blue, or custom color
- Surface:Smooth, corona-treated, coated, or laminated
- Format:Jumbo roll, slit roll, sheet, strip, die-cut part
- Use:Motor, transformer, coil, cable, battery, electronics
-
- Common thickness: 12–250 microns
- Material type: PET / polyester film
- Color options: clear, white, black, matte, translucent
- Supply format: rolls, sheets, kiss-cut parts, full-cut parts
- Surface structure: plain, coated, adhesive-backed, liner laminated
- Typical uses: insulation parts, overlays, stencil film, masking, custom components
-
- Material: Polyester (PET) base film
- Surface: Scratch-resistant or hard-coated
- Thickness: Common custom range 20–120 μm
- Finish: Clear, matte, or anti-glare optional
- Adhesion: Controlled low, medium, or high peel
- Supply Form: Roll, sheet, or die-cut parts
-
- Material:PET polyester film
- Coating side:Single side, double side, or differential A/B side
- Coating system:Silicone, non-silicone, or fluoropolymer release coating
- Thickness:25–188 μm common range
- Color:Clear, translucent, milky white, or customized appearance
- Release force: 3–150 gf/in, adjusted by adhesive system
-
- Film: PE or PET
- Colors: clear, blue, milky white
- Tack: low or medium
- Surfaces: mirror face, mirror backing
- Supply: slit rolls or jumbo rolls
- Use: cutting, edging, storage, transport
