No products were found matching your selection.
Other Related Products
-
- Material: Removable PE film with acrylic adhesive
- Color: Clear, blue, black and white, or printed
- Thickness: Commonly 30-80 um; extended grades subject to review
- Width: Custom slit widths for panel lines
- Roll format: Machine-length or jumbo rolls
- Surfaces: MDF, melamine, cabinet, and decorative boards
-
- Material: Clear PET film with anti-fog coating
- Color: Transparent / clear
- Thickness: 50–250 micron
- Surface: Single-side or double-side anti-fog
- Format: Roll, sheet, slit roll, die-cut piece
- Use: Packaging windows, face shields, clear covers
-
Conventional PET and BOPET films commonly show a polyester film melting temperature of about 245-260 C by DSC. The reported onset, peak, or endset varies with grade, orientation, thermal history, and scan conditions. Use it for base-film identification, not as a finished-film service limit. Confirm adhesive, coating, surface, dwell, and removal behavior under intended conditions.
-
- Material: Coated PET / polyester film
- Common Thickness: 75μm, 100μm, 125μm
- Surface: Matte, semi-matte, or clear coated
- Peel Type: Hot peel, cold peel, warm peel
- Width Range: 30cm, 60cm, 1,000mm, custom slit widths
- Main Use: Heat transfer carrier film for industrial printing and decoration
-
- Material: PE protective film
- Color: Clear, blue, black & white
- Thickness: 40–100 microns
- Adhesion: Low, medium, high tack
- Roll Width: 50–1240 mm
- Use Stage: Processing, storage, transit, installation
-
- Material: Biaxially oriented polyester (BOPET)
- Thickness: Available in custom thicknesses ranging from 0.05mm to 0.5mm
- Color: Clear, with options for custom tinting
- UV Resistance: High-level UV blocking and stabilizer additives
- Durability: Excellent resistance to weathering, chemicals, and abrasion
- Applications: Suitable for outdoor signage, protective overlays, and solar back sheets
-
- Material: Fluoro-silicone coated PET film
- Color: Clear, milky white, or customized tone
- Thickness: 50μm, 75μm, 100μm, custom thickness available
- Release side: Single-side or differential release
- Adhesive match: Silicone PSA, silicone tape, soft medical gel adhesive
- Key function: Clean release with controlled peel force
-
- Material: PE film with removable acrylic adhesive
- Thickness: 50 um, 60 um, 80 um, 100 um
- Width: 600 mm, 900 mm, 1200 mm, or slit width
- Color: clear, blue, milky white, or printed
- Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
- Use: protects laminate planks during installation and handover
-
Clear shipping film for amplifier control panels helps limit scratches, scuffs, trapped dust, fingerprints, and packaging contact marks on display windows, printed overlays, painted faceplates, and plastic control areas during assembly, storage, and transport. The correct film is not selected by transparency alone. It must provide enough surface contact to remain stable without creating excessive removal force after the planned protection period. Surface type, coating condition, panel geometry, packaging pressure, temperature, humidity, transport distance, and the intended removal method should all be evaluated on an actual panel before full use.
