No products were found matching your selection.
Other Related Products
-
COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…
-
- Material: Polyethylene (PE) protective film
- Thickness: 30–100 microns (custom available)
- Adhesion: Low to medium tack, surface-adjustable
- Color: Transparent, blue, black/white, custom colors
- Width: 50mm–1200mm (custom slitting supported)
- Length: 50m–2000m (jumbo roll supply available)
-
- Material:PET polyester film
- Coating side:Single side, double side, or differential A/B side
- Coating system:Silicone, non-silicone, or fluoropolymer release coating
- Thickness:25–188 μm common range
- Color:Clear, translucent, milky white, or customized appearance
- Release force: 3–150 gf/in, adjusted by adhesive system
-
- Roll Widths: 300–1,400 mm (custom to 1,350mm)
- Roll Length: Adjustable, typically 200–400 m
- MOQ: As low as 100 kg (≈500 kg for certain grades)
Customizable Enhancements:
- Anti-scratch or anti-fog coatings
- UV stabilization or conductive/ESD treatment
- Surface corona for improved printability
-
- Material: anti-static treated PET polyester film
- Color: clear, transparent, blue tint, or custom color
- Surface option: single-side or double-side treatment
- Thickness: available in multiple converting grades
- Supply form: master rolls, slit rolls, and sheets
- Main use: ESD handling, electronics protection, clean converting
-
- Material: PE surface protection film
- Adhesive: removable acrylic system
- Color: clear, blue, black & white
- Thickness: standard and custom options
- Printing: plain or logo printable
- Use: temporary protection for plastic sheets
-
- Material: PE protective film
- Common thickness: 30–100 microns
- Standard colors: clear, blue, black & white
- Adhesion level: low to medium tack
- Typical widths: 200–1600 mm
- Main use: temporary appliance surface protection
-
- Material: PE or PET protective film
- Color: clear, translucent, black & white
- Thickness: 50–100 microns typical
- Adhesive: water-based acrylic or acrylic PSA
- Width: custom slit rolls and sheet formats
- Use stage: fabrication, transport, installation, renovation
-
- Material: PE film
- Color: Clear, blue, or milky white
- Adhesive: Low-tack acrylic
- Typical Thickness: 50–100 μm
- Supply Form: Slit rolls or larger rolls
- Main Use: Temporary screen surface protection
