No products were found matching your selection.

Other Related Products

  • Release Coating Polyester Film

    • Material:PET polyester film
    • Coating side:Single side, double side, or differential A/B side
    • Coating system:Silicone, non-silicone, or fluoropolymer release coating
    • Thickness:25–188 μm common range
    • Color:Clear, translucent, milky white, or customized appearance
    • Release force: 3–150 gf/in, adjusted by adhesive system
    Read moreDone

  • Polyester Film Melting Temperature Technical Data

    Conventional PET and BOPET films commonly show a polyester film melting temperature of about 245-260 C by DSC. The reported onset, peak, or endset varies with grade, orientation, thermal history, and scan conditions. Use it for base-film identification, not as a finished-film service limit. Confirm adhesive, coating, surface, dwell, and removal behavior under intended conditions.

    Read moreDone

  • Pet Anti Scratch Film

    • Material: Polyester (PET) base film
    • Surface: Scratch-resistant or hard-coated
    • Thickness: Common custom range 20–120 μm
    • Finish: Clear, matte, or anti-glare optional
    • Adhesion: Controlled low, medium, or high peel
    • Supply Form: Roll, sheet, or die-cut parts
    Read moreDone

  • Stone Protection Film

    • Material: PE or PET protective film
    • Color: clear, translucent, black & white
    • Thickness: 50–100 microns typical
    • Adhesive: water-based acrylic or acrylic PSA
    • Width: custom slit rolls and sheet formats
    • Use stage: fabrication, transport, installation, renovation
    Read moreDone

  • PET Protective Film for Anti Fingerprint

    • Material: PET base film
    • Finish: clear, matte, or ultra-matte
    • Surface Function: anti-smudge and easy-clean
    • Thickness: customizable by end use
    • Adhesive: silicone, acrylic, OCA, or non-tacky
    • Supply Form: jumbo roll, slit roll, or sheet
    Read moreDone

  • PET Film Electrical Insulation

    • Material: Electrical grade PET film / polyester film
    • Thickness:25–350 micron
    • Color:Clear, white, black, blue, or custom color
    • Surface:Smooth, corona-treated, coated, or laminated
    • Format:Jumbo roll, slit roll, sheet, strip, die-cut part
    • Use:Motor, transformer, coil, cable, battery, electronics
    Read moreDone

  • Corona Treatment PET Film

    • Material: BOPET / polyester film
    • Surface Treatment: One-side or both-side corona
    • Thickness: 8–75 microns
    • Appearance: Clear, clean, smooth
    • Treated Side: Commonly 50–52+ dyn/cm
    • Use: Printing, coating, lamination, tape, metallizing
    Read moreDone

  • Sheet Metal Protective Film

    • Material: PE protective film
    • Color: Clear, blue, black & white
    • Thickness: 40–100 microns
    • Adhesion: Low, medium, high tack
    • Roll Width: 50–1240 mm
    • Use Stage: Processing, storage, transit, installation
    Read moreDone

  • Release Liner For Silicone Adhesive

    • Material: Fluoro-silicone coated PET film
    • Color: Clear, milky white, or customized tone
    • Thickness: 50μm, 75μm, 100μm, custom thickness available
    • Release side: Single-side or differential release
    • Adhesive match: Silicone PSA, silicone tape, soft medical gel adhesive
    • Key function: Clean release with controlled peel force
    Read moreDone