No products were found matching your selection.
Other Related Products
-
Plastic film for appliance touch controls is used to protect appearance-sensitive interfaces while glass, printed overlays, display windows, decorative panels, and surrounding housings move through manufacturing. The challenge is not simply preventing scratches. A film can introduce a new problem if its adhesion is mismatched, contamination is trapped beneath it, an edge lifts near a cutout, or the temporary layer changes a capacitive touch check. This solution focuses on surface identification, controlled application, sample validation, film-on versus film-off functional checks, planned removal, and failure diagnosis before full production use.
-
- Material: PE film with removable acrylic adhesive
- Thickness: 50 um, 60 um, 80 um, 100 um
- Width: 600 mm, 900 mm, 1200 mm, or slit width
- Color: clear, blue, milky white, or printed
- Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
- Use: protects laminate planks during installation and handover
-
- Material: PET / BoPET polyester film
- Common thickness: 12–250 microns
- Color options: clear, milky white, matte, black
- Surface options: plain, corona treated, coated
- Supply format: jumbo roll, slit roll, sheet, die-cut
- Main uses: insulation, laminates, labels, protection
-
- Material: PET film with siliconized release surface
- Thickness: 25 / 36 / 50 / 75 / 100 micron
- Color: Clear, milky white, blue tint or customized
- Release Type: Single-side, double-side or differential release
- Roll Form: Jumbo roll or slit roll
- Main Uses: Labels, tapes, die-cut parts, PSA lamination
-
- Residue-Free Removal: Easily peel off without leaving any adhesive residue, ensuring a clean surface.
- Customizable Adhesion Levels: Available in low, medium, and high adhesion strengths to suit different processing needs.
- UV and Weather Resistant: Suitable for both indoor and limited outdoor applications, with UV stability up to 3 months.
- Printable Surface: Option to print logos or handling instructions, enhancing brand visibility.
- Eco-Friendly Materials: Made from recyclable polyethylene (PE), compliant with RoHS and REACH standards.
- Versatile Application: Ideal for protecting mirror, brushed, and matte stainless steel surfaces during various processes.
-
- Material:Flame retardant polyester film
- Thickness:25–250 μm typical range
- Color:Clear, milky white, black, or custom
- Flame Rating:UL94 VTM-rated options
- Surface:Untreated, corona treated, or coated
- Use:Battery, motor, transformer, and electronic insulation
-
- Material: PE or PET protective film
- Color: clear, translucent, black & white
- Thickness: 50–100 microns typical
- Adhesive: water-based acrylic or acrylic PSA
- Width: custom slit rolls and sheet formats
- Use stage: fabrication, transport, installation, renovation
-
- Material:BOPET / polyester film
- Finish:Super matte, low gloss
- Thickness:12–100 μm, common range
- Width:500–2050 mm, slit roll available
- Color:Clear, translucent, white, or matte metallized
- Use:Printing, lamination, labels, packaging, decorative surfaces
-
A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.
