No products were found matching your selection.
Other Related Products
-
COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…
-
A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.
-
- Material: anti-static treated PET polyester film
- Color: clear, transparent, blue tint, or custom color
- Surface option: single-side or double-side treatment
- Thickness: available in multiple converting grades
- Supply form: master rolls, slit rolls, and sheets
- Main use: ESD handling, electronics protection, clean converting
-
- Material: Biaxially oriented PET
- Color: Clear or custom tinted
- Thickness: Typically 8-250 um
- Treatment: One-side, two-side, or asymmetric
- Width: Typically 100-2200 mm
- Format: Master rolls, slit rolls, or sheets
-
Polyester film shelf life depends on construction, packaging integrity, storage history, and retained properties. This reference covers plain, treated, coated, and adhesive-coated PET protective film. Use grade-specific limits. Inspect uncertain stock against approved data and confirm it by representative sample testing before full use.
-
- Material:Flame retardant polyester film
- Thickness:25–250 μm typical range
- Color:Clear, milky white, black, or custom
- Flame Rating:UL94 VTM-rated options
- Surface:Untreated, corona treated, or coated
- Use:Battery, motor, transformer, and electronic insulation
-
- Material: Coated PET / polyester film
- Common Thickness: 75μm, 100μm, 125μm
- Surface: Matte, semi-matte, or clear coated
- Peel Type: Hot peel, cold peel, warm peel
- Width Range: 30cm, 60cm, 1,000mm, custom slit widths
- Main Use: Heat transfer carrier film for industrial printing and decoration
-
- Material: Nano hybrid glass composite
- Surface: Clear, smooth, oleophobic
- Hardness: 9H pencil hardness
- Adhesive: Full-area silicone layer
- Formats: Sheets, blanks, die-cut parts
- Uses: Mobile, automotive, industrial displays
-
- Material: PET base film
- Finish: clear, matte, or ultra-matte
- Surface Function: anti-smudge and easy-clean
- Thickness: customizable by end use
- Adhesive: silicone, acrylic, OCA, or non-tacky
- Supply Form: jumbo roll, slit roll, or sheet
