No products were found matching your selection.
Other Related Products
-
- Material: PE film with removable acrylic adhesive
- Thickness: 50 um, 60 um, 80 um, 100 um
- Width: 600 mm, 900 mm, 1200 mm, or slit width
- Color: clear, blue, milky white, or printed
- Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
- Use: protects laminate planks during installation and handover
-
- Material: Polyester (PET) base film
- Surface: Scratch-resistant or hard-coated
- Thickness: Common custom range 20–120 μm
- Finish: Clear, matte, or anti-glare optional
- Adhesion: Controlled low, medium, or high peel
- Supply Form: Roll, sheet, or die-cut parts
-
- Material: Clear PET film with anti-fog coating
- Color: Transparent / clear
- Thickness: 50–250 micron
- Surface: Single-side or double-side anti-fog
- Format: Roll, sheet, slit roll, die-cut piece
- Use: Packaging windows, face shields, clear covers
-
- Material: Optical PET with ITO conductive coating
- Color: Clear transparent
- Common thickness: 125 μm / 175 μm / 200 μm
- Coating side: One-side conductive surface
- Supply format: Rolls, sheets, slit rolls, custom-cut parts
- Main uses: Touch, display, heater, shielding, sensor parts
-
- Material: Polyethylene (PE) protective film
- Thickness: 30–100 microns (custom available)
- Adhesion: Low to medium tack, surface-adjustable
- Color: Transparent, blue, black/white, custom colors
- Width: 50mm–1200mm (custom slitting supported)
- Length: 50m–2000m (jumbo roll supply available)
-
- Material: BOPET / polyester film
- Surface Treatment: One-side or both-side corona
- Thickness: 8–75 microns
- Appearance: Clear, clean, smooth
- Treated Side: Commonly 50–52+ dyn/cm
- Use: Printing, coating, lamination, tape, metallizing
-
- Material: Coated PET / polyester film
- Common Thickness: 75μm, 100μm, 125μm
- Surface: Matte, semi-matte, or clear coated
- Peel Type: Hot peel, cold peel, warm peel
- Width Range: 30cm, 60cm, 1,000mm, custom slit widths
- Main Use: Heat transfer carrier film for industrial printing and decoration
-
- Material: Optical-grade acrylic OCA adhesive
- Appearance: Clear, low haze, clean surface
- Common Thickness: 50 / 100 / 125 / 175 / 250 μm
- Supply Form: Roll, sheet, or die-cut piece
- Liner: Double PET or film release liner
- Main Use: LCD/OLED bonding, cover lens bonding, touch panel lamination
-
- Material: PE or PET protective film
- Color: clear, translucent, black & white
- Thickness: 50–100 microns typical
- Adhesive: water-based acrylic or acrylic PSA
- Width: custom slit rolls and sheet formats
- Use stage: fabrication, transport, installation, renovation
