No products were found matching your selection.
Other Related Products
-
- Material: PE or PET protective film
- Color: clear or translucent
- Adhesive type: removable PSA
- Surface focus: overlays and display windows
- Process fit: printing, die cutting, lamination
- Main purpose: temporary surface protection
-
COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…
-
- Material: PC, PE, PMMA, or multi-layer film
- Finish: gloss, matte, textured, anti-glare, or printed
- Color: clear, tinted, white, black, or custom
- Thickness: selected by forming depth and geometry
- Process: printing, thermoforming, trimming, and back-injection
- Use: IMD, FIM, HMI panels, trim parts, and decorative housings
-
- Material: Coated PET / polyester film
- Common Thickness: 75μm, 100μm, 125μm
- Surface: Matte, semi-matte, or clear coated
- Peel Type: Hot peel, cold peel, warm peel
- Width Range: 30cm, 60cm, 1,000mm, custom slit widths
- Main Use: Heat transfer carrier film for industrial printing and decoration
-
- Material: PE film with removable acrylic adhesive
- Thickness: 50 um, 60 um, 80 um, 100 um
- Width: 600 mm, 900 mm, 1200 mm, or slit width
- Color: clear, blue, milky white, or printed
- Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
- Use: protects laminate planks during installation and handover
-
- Material: PE film
- Color: Clear, blue, or milky white
- Adhesive: Low-tack acrylic
- Typical Thickness: 50–100 μm
- Supply Form: Slit rolls or larger rolls
- Main Use: Temporary screen surface protection
-
- Material: nano hybrid glass film
- Thickness: 0.18 mm / 0.20 mm / 0.25 mm
- Finish: clear, matte, privacy
- Hardness: up to 9H
- Adhesive: full silicone adhesive
- Supply Form: sheet, roll, die-cut pieces
-
- Material: PE or PET protective film
- Color: clear, translucent, black & white
- Thickness: 50–100 microns typical
- Adhesive: water-based acrylic or acrylic PSA
- Width: custom slit rolls and sheet formats
- Use stage: fabrication, transport, installation, renovation
-
- Base Material: Clear or blue PET film
- Coating Type: Silicone-free release coating
- Common Thickness: 25μm, 36μm, 50μm, 75μm, 100μm, 125μm
- Release Force: 5–30 g/in, 30–80 g/in, 80–150 g/in options
- Roll Format: Narrow slit rolls or master rolls, 3 inch or 6 inch cor
- Main Uses: OCA, electronics die cutting, medical adhesive tape, precision adhesive converting
