No products were found matching your selection.
Other Related Products
-
- Material: Optical-grade PET with single-side ITO coating
- Color: Clear with a slight blue-gray tint
- PET thickness: 125, 175, or 200 um
- Sheet resistance: 10, 60, 100, 200, or 300 ohm/sq
- Supply form: Rolls, sheets, slit rolls, or converted parts
- Main uses: Touch electrodes, transparent heating, and EMI/RFI shielding
-
- Material: Nano hybrid glass composite
- Surface: Clear, smooth, oleophobic
- Hardness: 9H pencil hardness
- Adhesive: Full-area silicone layer
- Formats: Sheets, blanks, die-cut parts
- Uses: Mobile, automotive, industrial displays
-
Clear shipping film for amplifier control panels helps limit scratches, scuffs, trapped dust, fingerprints, and packaging contact marks on display windows, printed overlays, painted faceplates, and plastic control areas during assembly, storage, and transport. The correct film is not selected by transparency alone. It must provide enough surface contact to remain stable without creating excessive removal force after the planned protection period. Surface type, coating condition, panel geometry, packaging pressure, temperature, humidity, transport distance, and the intended removal method should all be evaluated on an actual panel before full use.
-
- Common thickness: 12–250 microns
- Material type: PET / polyester film
- Color options: clear, white, black, matte, translucent
- Supply format: rolls, sheets, kiss-cut parts, full-cut parts
- Surface structure: plain, coated, adhesive-backed, liner laminated
- Typical uses: insulation parts, overlays, stencil film, masking, custom components
-
- Material: Polyethylene (PE) protective film
- Thickness: 30–100 microns (custom available)
- Adhesion: Low to medium tack, surface-adjustable
- Color: Transparent, blue, black/white, custom colors
- Width: 50mm–1200mm (custom slitting supported)
- Length: 50m–2000m (jumbo roll supply available)
-
- Material: PE film with removable acrylic adhesive
- Thickness: 50 um, 60 um, 80 um, 100 um
- Width: 600 mm, 900 mm, 1200 mm, or slit width
- Color: clear, blue, milky white, or printed
- Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
- Use: protects laminate planks during installation and handover
-
- Material: PE surface protection film
- Adhesive: removable acrylic system
- Color: clear, blue, black & white
- Thickness: standard and custom options
- Printing: plain or logo printable
- Use: temporary protection for plastic sheets
-
- Material: BOPET / polyester film
- Surface Treatment: One-side or both-side corona
- Thickness: 8–75 microns
- Appearance: Clear, clean, smooth
- Treated Side: Commonly 50–52+ dyn/cm
- Use: Printing, coating, lamination, tape, metallizing
-
The COF of PET film describes resistance when a defined surface starts and continues sliding against another surface. This reference applies to uncoated, coated, treated and PET-based protective film used in unwinding, slitting, laminating and die cutting. Each result must be read with its tested sides, method, load and conditioning history. Equipment compatibility, adhesive behavior and removal performance still require sample testing on the actual material and process.
