No products were found matching your selection.

Other Related Products

  • Non Silicone Release Liner

    • Base Material: Clear or blue PET film
    • Coating Type: Silicone-free release coating
    • Common Thickness: 25μm, 36μm, 50μm, 75μm, 100μm, 125μm
    • Release Force: 5–30 g/in, 30–80 g/in, 80–150 g/in options
    • Roll Format: Narrow slit rolls or master rolls, 3 inch or 6 inch cor
    • Main Uses: OCA, electronics die cutting, medical adhesive tape, precision adhesive converting
    Read moreDone

  • Corona Treatment PET Film

    • Material: BOPET / polyester film
    • Surface Treatment: One-side or both-side corona
    • Thickness: 8–75 microns
    • Appearance: Clear, clean, smooth
    • Treated Side: Commonly 50–52+ dyn/cm
    • Use: Printing, coating, lamination, tape, metallizing
    Read moreDone

  • Ceramic Tile Protective Film

    • Material: Polyethylene (PE) protective film
    • Thickness: 30–100 microns (custom available)
    • Adhesion: Low to medium tack, surface-adjustable
    • Color: Transparent, blue, black/white, custom colors
    • Width: 50mm–1200mm (custom slitting supported)
    • Length: 50m–2000m (jumbo roll supply available)
    Read moreDone

  • Plastic Film for Injection Molding

    • Materials: PC, PET, acrylic, or multilayer film
    • Thickness: Common project range 125-500 um
    • Appearance: Clear, tinted, translucent, printed, or metallic
    • Finish: Gloss, matte, textured, or formable coated surface
    • Supply: Rolls, sheets, printed blanks, or preformed inserts
    • Process: Printing, forming, trimming, and back-injection
    Read moreDone

  • PET Film for Heat Transfer Printing

    • Material: Coated PET / polyester film
    • Common Thickness: 75μm, 100μm, 125μm
    • Surface: Matte, semi-matte, or clear coated
    • Peel Type: Hot peel, cold peel, warm peel
    • Width Range: 30cm, 60cm, 1,000mm, custom slit widths
    • Main Use: Heat transfer carrier film for industrial printing and decoration
    Read moreDone

  • Optical Clear Adhesive Film

    • Adhesive thickness: 25-250 um
    • Color: Water-clear transparent
    • Adhesive: Optical-grade acrylic PSA
    • Liners: Differential PET release films
    • Formats: Rolls, sheets, die-cut parts
    • Bonding surfaces: Glass, PET, PMMA, PC
    Read moreDone

  • Clear Shipping Film for Amplifier Control Panels: Scratch and Residue Prevention

    Clear shipping film for amplifier control panels helps limit scratches, scuffs, trapped dust, fingerprints, and packaging contact marks on display windows, printed overlays, painted faceplates, and plastic control areas during assembly, storage, and transport. The correct film is not selected by transparency alone. It must provide enough surface contact to remain stable without creating excessive removal force after the planned protection period. Surface type, coating condition, panel geometry, packaging pressure, temperature, humidity, transport distance, and the intended removal method should all be evaluated on an actual panel before full use.

    Read moreDone

  • Pe Screen Protection Film

    • Material: PE film
    • Color: Clear, blue, or milky white
    • Adhesive: Low-tack acrylic
    • Typical Thickness: 50–100 μm
    • Supply Form: Slit rolls or larger rolls
    • Main Use: Temporary screen surface protection
    Read moreDone

  • Laminate Floor Protection Film

    • Material: PE film with removable acrylic adhesive
    • Thickness: 50 um, 60 um, 80 um, 100 um
    • Width: 600 mm, 900 mm, 1200 mm, or slit width
    • Color: clear, blue, milky white, or printed
    • Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
    • Use: protects laminate planks during installation and handover
    Read moreDone