No products were found matching your selection.

Other Related Products

  • COF of PET Film

    COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…

    Read moreDone

  • PET Film for Heat Transfer Printing

    • Material: Coated PET / polyester film
    • Common Thickness: 75μm, 100μm, 125μm
    • Surface: Matte, semi-matte, or clear coated
    • Peel Type: Hot peel, cold peel, warm peel
    • Width Range: 30cm, 60cm, 1,000mm, custom slit widths
    • Main Use: Heat transfer carrier film for industrial printing and decoration
    Read moreDone

  • Flame Retardant PET Film

    • Material:Flame retardant polyester film
    • Thickness:25–250 μm typical range
    • Color:Clear, milky white, black, or custom
    • Flame Rating:UL94 VTM-rated options
    • Surface:Untreated, corona treated, or coated
    • Use:Battery, motor, transformer, and electronic insulation
    Read moreDone

  • Plastic Sheet Protective Film

    • Material: PE surface protection film
    • Adhesive: removable acrylic system
    • Color: clear, blue, black & white
    • Thickness: standard and custom options
    • Printing: plain or logo printable
    • Use: temporary protection for plastic sheets
    Read moreDone

  • High-performance Membrane Switch Protection Film

    • Material: PE or PET protective film
    • Color: clear or translucent
    • Adhesive type: removable PSA
    • Surface focus: overlays and display windows
    • Process fit: printing, die cutting, lamination
    • Main purpose: temporary surface protection
    Read moreDone

  • Pet Anti Scratch Film

    • Material: Polyester (PET) base film
    • Surface: Scratch-resistant or hard-coated
    • Thickness: Common custom range 20–120 μm
    • Finish: Clear, matte, or anti-glare optional
    • Adhesion: Controlled low, medium, or high peel
    • Supply Form: Roll, sheet, or die-cut parts
    Read moreDone

  • Ceramic Tile Protective Film

    • Material: Polyethylene (PE) protective film
    • Thickness: 30–100 microns (custom available)
    • Adhesion: Low to medium tack, surface-adjustable
    • Color: Transparent, blue, black/white, custom colors
    • Width: 50mm–1200mm (custom slitting supported)
    • Length: 50m–2000m (jumbo roll supply available)
    Read moreDone

  • Pet Thermoforming Film

    • Roll Widths: 300–1,400 mm (custom to 1,350mm)
    • Roll Length: Adjustable, typically 200–400 m
    • MOQ: As low as 100 kg (≈500 kg for certain grades)

    Customizable Enhancements:

    • Anti-scratch or anti-fog coatings
    • UV stabilization or conductive/ESD treatment
    • Surface corona for improved printability
    Read moreDone

  • Optical Clear Adhesive Film

    • Material: Optical-grade acrylic OCA adhesive
    • Appearance: Clear, low haze, clean surface
    • Common Thickness: 50 / 100 / 125 / 175 / 250 μm
    • Supply Form: Roll, sheet, or die-cut piece
    • Liner: Double PET or film release liner
    • Main Use: LCD/OLED bonding, cover lens bonding, touch panel lamination
    Read moreDone