No products were found matching your selection.
Other Related Products
-
- Material: PET polyester film
- Color options: clear, matte, white, black, or custom
- Common thickness: approx. 25–250 microns
- Supply format: die cut pieces, kiss-cut sheets, or roll form
- Adhesive option: single-sided, double-sided, or non-adhesive
- Liner option: paper liner, film liner, or differential release liner
-
- Material: Polyester (PET) base film
- Surface: Scratch-resistant or hard-coated
- Thickness: Common custom range 20–120 μm
- Finish: Clear, matte, or anti-glare optional
- Adhesion: Controlled low, medium, or high peel
- Supply Form: Roll, sheet, or die-cut parts
-
- Material: Removable PE film with acrylic adhesive
- Color: Clear, blue, black and white, or printed
- Thickness: Commonly 30-80 um; extended grades subject to review
- Width: Custom slit widths for panel lines
- Roll format: Machine-length or jumbo rolls
- Surfaces: MDF, melamine, cabinet, and decorative boards
-
- Material: PE or PET protective film
- Color: clear, translucent, black & white
- Thickness: 50–100 microns typical
- Adhesive: water-based acrylic or acrylic PSA
- Width: custom slit rolls and sheet formats
- Use stage: fabrication, transport, installation, renovation
-
- Material: Electrical grade PET film / polyester film
- Thickness:25–350 micron
- Color:Clear, white, black, blue, or custom color
- Surface:Smooth, corona-treated, coated, or laminated
- Format:Jumbo roll, slit roll, sheet, strip, die-cut part
- Use:Motor, transformer, coil, cable, battery, electronics
-
- Material: PE film with removable acrylic adhesive
- Thickness: 50 um, 60 um, 80 um, 100 um
- Width: 600 mm, 900 mm, 1200 mm, or slit width
- Color: clear, blue, milky white, or printed
- Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
- Use: protects laminate planks during installation and handover
-
- Material: PE or PET protective film
- Color: clear or translucent
- Adhesive type: removable PSA
- Surface focus: overlays and display windows
- Process fit: printing, die cutting, lamination
- Main purpose: temporary surface protection
-
- Material: BOPET / polyester film
- Surface Treatment: One-side or both-side corona
- Thickness: 8–75 microns
- Appearance: Clear, clean, smooth
- Treated Side: Commonly 50–52+ dyn/cm
- Use: Printing, coating, lamination, tape, metallizing
-
Conventional PET and BOPET films commonly show a polyester film melting temperature of about 245-260 C by DSC. The reported onset, peak, or endset varies with grade, orientation, thermal history, and scan conditions. Use it for base-film identification, not as a finished-film service limit. Confirm adhesive, coating, surface, dwell, and removal behavior under intended conditions.
