No products were found matching your selection.
Other Related Products
-
- Material: Polyethylene (PE) base film
- Adhesive Type: Water‑based acrylic / pressure‑sensitive adhesive
- Thickness: 30–120 microns range
- Colors: Transparent, blue, black & white
- Widths: 200–2000 mm customizable
- Roll Lengths: 100–2000 m per roll
-
- Material: Optical PET with ITO conductive coating
- Color: Clear transparent
- Common thickness: 125 μm / 175 μm / 200 μm
- Coating side: One-side conductive surface
- Supply format: Rolls, sheets, slit rolls, custom-cut parts
- Main uses: Touch, display, heater, shielding, sensor parts
-
COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…
-
- Common thickness: 12–250 microns
- Material type: PET / polyester film
- Color options: clear, white, black, matte, translucent
- Supply format: rolls, sheets, kiss-cut parts, full-cut parts
- Surface structure: plain, coated, adhesive-backed, liner laminated
- Typical uses: insulation parts, overlays, stencil film, masking, custom components
-
- Material: PE or PET protective film
- Color: clear, translucent, black & white
- Thickness: 50–100 microns typical
- Adhesive: water-based acrylic or acrylic PSA
- Width: custom slit rolls and sheet formats
- Use stage: fabrication, transport, installation, renovation
-
- Material: Optical-grade acrylic OCA adhesive
- Appearance: Clear, low haze, clean surface
- Common Thickness: 50 / 100 / 125 / 175 / 250 μm
- Supply Form: Roll, sheet, or die-cut piece
- Liner: Double PET or film release liner
- Main Use: LCD/OLED bonding, cover lens bonding, touch panel lamination
-
- Material: PE protective film
- Color: Clear, blue, black & white
- Thickness: 40–100 microns
- Adhesion: Low, medium, high tack
- Roll Width: 50–1240 mm
- Use Stage: Processing, storage, transit, installation
-
- Material: PET polyester film
- Color options: clear, matte, white, black, or custom
- Common thickness: approx. 25–250 microns
- Supply format: die cut pieces, kiss-cut sheets, or roll form
- Adhesive option: single-sided, double-sided, or non-adhesive
- Liner option: paper liner, film liner, or differential release liner
-
- Material: PE film
- Color: Clear, blue, or milky white
- Adhesive: Low-tack acrylic
- Typical Thickness: 50–100 μm
- Supply Form: Slit rolls or larger rolls
- Main Use: Temporary screen surface protection
