No products were found matching your selection.
Other Related Products
-
- Material: Removable PE film with acrylic adhesive
- Color: Clear, blue, black and white, or printed
- Thickness: Commonly 30-80 um; extended grades subject to review
- Width: Custom slit widths for panel lines
- Roll format: Machine-length or jumbo rolls
- Surfaces: MDF, melamine, cabinet, and decorative boards
-
- Film: PE or PET
- Colors: clear, blue, milky white
- Tack: low or medium
- Surfaces: mirror face, mirror backing
- Supply: slit rolls or jumbo rolls
- Use: cutting, edging, storage, transport
-
The COF of PET film describes resistance when a defined surface starts and continues sliding against another surface. This reference applies to uncoated, coated, treated and PET-based protective film used in unwinding, slitting, laminating and die cutting. Each result must be read with its tested sides, method, load and conditioning history. Equipment compatibility, adhesive behavior and removal performance still require sample testing on the actual material and process.
-
A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.
-
- Material: PE surface protection film
- Adhesive: removable acrylic system
- Color: clear, blue, black & white
- Thickness: standard and custom options
- Printing: plain or logo printable
- Use: temporary protection for plastic sheets
-
- Material: Fluoro-silicone coated PET film
- Color: Clear, milky white, or customized tone
- Thickness: 50μm, 75μm, 100μm, custom thickness available
- Release side: Single-side or differential release
- Adhesive match: Silicone PSA, silicone tape, soft medical gel adhesive
- Key function: Clean release with controlled peel force
-
- Material: PE protective film
- Color: Clear, blue, black & white
- Thickness: 40–100 microns
- Adhesion: Low, medium, high tack
- Roll Width: 50–1240 mm
- Use Stage: Processing, storage, transit, installation
-
- Material: Clear PET film with anti-fog coating
- Color: Transparent / clear
- Thickness: 50–250 micron
- Surface: Single-side or double-side anti-fog
- Format: Roll, sheet, slit roll, die-cut piece
- Use: Packaging windows, face shields, clear covers
-
- Material: PET base film
- Finish: clear, matte, or ultra-matte
- Surface Function: anti-smudge and easy-clean
- Thickness: customizable by end use
- Adhesive: silicone, acrylic, OCA, or non-tacky
- Supply Form: jumbo roll, slit roll, or sheet
