No products were found matching your selection.
Other Related Products
-
Conventional PET and BOPET films commonly show a polyester film melting temperature of about 245-260 C by DSC. The reported onset, peak, or endset varies with grade, orientation, thermal history, and scan conditions. Use it for base-film identification, not as a finished-film service limit. Confirm adhesive, coating, surface, dwell, and removal behavior under intended conditions.
-
- Material: Fluoro-silicone coated PET film
- Color: Clear, milky white, or customized tone
- Thickness: 50μm, 75μm, 100μm, custom thickness available
- Release side: Single-side or differential release
- Adhesive match: Silicone PSA, silicone tape, soft medical gel adhesive
- Key function: Clean release with controlled peel force
-
- Material: PE or PET protective film
- Color: clear, translucent, black & white
- Thickness: 50–100 microns typical
- Adhesive: water-based acrylic or acrylic PSA
- Width: custom slit rolls and sheet formats
- Use stage: fabrication, transport, installation, renovation
-
- Material: PE or PET protective film
- Color: clear or translucent
- Adhesive type: removable PSA
- Surface focus: overlays and display windows
- Process fit: printing, die cutting, lamination
- Main purpose: temporary surface protection
-
- Material: PE protective film
- Color: Clear, blue, black & white
- Thickness: 40–100 microns
- Adhesion: Low, medium, high tack
- Roll Width: 50–1240 mm
- Use Stage: Processing, storage, transit, installation
-
- Material: Polyethylene (PE) protective film
- Thickness: 30–100 microns (custom available)
- Adhesion: Low to medium tack, surface-adjustable
- Color: Transparent, blue, black/white, custom colors
- Width: 50mm–1200mm (custom slitting supported)
- Length: 50m–2000m (jumbo roll supply available)
-
Polyester film shelf life depends on construction, packaging integrity, storage history, and retained properties. This reference covers plain, treated, coated, and adhesive-coated PET protective film. Use grade-specific limits. Inspect uncertain stock against approved data and confirm it by representative sample testing before full use.
-
- Material: PE film
- Color: Clear, blue, or milky white
- Adhesive: Low-tack acrylic
- Typical Thickness: 50–100 μm
- Supply Form: Slit rolls or larger rolls
- Main Use: Temporary screen surface protection
-
- Material: Biaxially oriented PET
- Color: Clear or custom tinted
- Thickness: Typically 8-250 um
- Treatment: One-side, two-side, or asymmetric
- Width: Typically 100-2200 mm
- Format: Master rolls, slit rolls, or sheets
