No products were found matching your selection.

Other Related Products

  • PET Film for Heat Transfer Printing

    • Material: Coated PET / polyester film
    • Common Thickness: 75μm, 100μm, 125μm
    • Surface: Matte, semi-matte, or clear coated
    • Peel Type: Hot peel, cold peel, warm peel
    • Width Range: 30cm, 60cm, 1,000mm, custom slit widths
    • Main Use: Heat transfer carrier film for industrial printing and decoration
    Read moreDone

  • Super Matte Finished PET Film

    • Material:BOPET / polyester film
    • Finish:Super matte, low gloss
    • Thickness:12–100 μm, common range
    • Width:500–2050 mm, slit roll available
    • Color:Clear, translucent, white, or matte metallized
    • Use:Printing, lamination, labels, packaging, decorative surfaces
    Read moreDone

  • Laminate Floor Protection Film

    • Material: PE film with removable acrylic adhesive
    • Thickness: 50 um, 60 um, 80 um, 100 um
    • Width: 600 mm, 900 mm, 1200 mm, or slit width
    • Color: clear, blue, milky white, or printed
    • Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
    • Use: protects laminate planks during installation and handover
    Read moreDone

  • Pet Thermoforming Film

    • Roll Widths: 300–1,400 mm (custom to 1,350mm)
    • Roll Length: Adjustable, typically 200–400 m
    • MOQ: As low as 100 kg (≈500 kg for certain grades)

    Customizable Enhancements:

    • Anti-scratch or anti-fog coatings
    • UV stabilization or conductive/ESD treatment
    • Surface corona for improved printability
    Read moreDone

  • Clear Shipping Film for Amplifier Control Panels: Scratch and Residue Prevention

    Clear shipping film for amplifier control panels helps limit scratches, scuffs, trapped dust, fingerprints, and packaging contact marks on display windows, printed overlays, painted faceplates, and plastic control areas during assembly, storage, and transport. The correct film is not selected by transparency alone. It must provide enough surface contact to remain stable without creating excessive removal force after the planned protection period. Surface type, coating condition, panel geometry, packaging pressure, temperature, humidity, transport distance, and the intended removal method should all be evaluated on an actual panel before full use.

    Read moreDone

  • Laser Cut Polyester Film

    • Common thickness: 12–250 microns
    • Material type: PET / polyester film
    • Color options: clear, white, black, matte, translucent
    • Supply format: rolls, sheets, kiss-cut parts, full-cut parts
    • Surface structure: plain, coated, adhesive-backed, liner laminated
    • Typical uses: insulation parts, overlays, stencil film, masking, custom components
    Read moreDone

  • Release Coating Polyester Film

    • Material:PET polyester film
    • Coating side:Single side, double side, or differential A/B side
    • Coating system:Silicone, non-silicone, or fluoropolymer release coating
    • Thickness:25–188 μm common range
    • Color:Clear, translucent, milky white, or customized appearance
    • Release force: 3–150 gf/in, adjusted by adhesive system
    Read moreDone

  • Optical Clear Adhesive Film

    • Adhesive thickness: 25-250 um
    • Color: Water-clear transparent
    • Adhesive: Optical-grade acrylic PSA
    • Liners: Differential PET release films
    • Formats: Rolls, sheets, die-cut parts
    • Bonding surfaces: Glass, PET, PMMA, PC
    Read moreDone

  • Release Liner For Stickers

    • Material:Glassine paper, kraft paper, PE coated paper, or PET film
    • Color:White, yellow, blue, clear, or custom color
    • Thickness:Paper 40–120gsm; PET film 25–75μm
    • Release Side:One-side or two-side silicone coating
    • Format:Jumbo roll, slit roll, sheet liner, or custom width
    • Use:Sticker rolls, kiss-cut sheets, printed stickers, and labels
    Read moreDone