No products were found matching your selection.
Other Related Products
-
A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.
-
- Material: PE protective film
- Color: Clear, blue, black & white
- Thickness: 40–100 microns
- Adhesion: Low, medium, high tack
- Roll Width: 50–1240 mm
- Use Stage: Processing, storage, transit, installation
-
COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…
-
- Material: Biaxially oriented PET
- Color: Natural clear
- Thickness: Typical reference 12-250 um
- Formats: Master rolls, slit rolls, cut sheets
- Surface: Untreated or basic treated options
- Uses: Printing, lamination, packaging, graphics
-
- Material:Glassine paper, kraft paper, PE coated paper, or PET film
- Color:White, yellow, blue, clear, or custom color
- Thickness:Paper 40–120gsm; PET film 25–75μm
- Release Side:One-side or two-side silicone coating
- Format:Jumbo roll, slit roll, sheet liner, or custom width
- Use:Sticker rolls, kiss-cut sheets, printed stickers, and labels
-
Polyester film shelf life depends on construction, packaging integrity, storage history, and retained properties. This reference covers plain, treated, coated, and adhesive-coated PET protective film. Use grade-specific limits. Inspect uncertain stock against approved data and confirm it by representative sample testing before full use.
-
- Material: Polyethylene (PE) base film
- Adhesive Type: Water‑based acrylic / pressure‑sensitive adhesive
- Thickness: 30–120 microns range
- Colors: Transparent, blue, black & white
- Widths: 200–2000 mm customizable
- Roll Lengths: 100–2000 m per roll
-
- Adhesive thickness: 25-250 um
- Color: Water-clear transparent
- Adhesive: Optical-grade acrylic PSA
- Liners: Differential PET release films
- Formats: Rolls, sheets, die-cut parts
- Bonding surfaces: Glass, PET, PMMA, PC
-
- Material: anti-static treated PET polyester film
- Color: clear, transparent, blue tint, or custom color
- Surface option: single-side or double-side treatment
- Thickness: available in multiple converting grades
- Supply form: master rolls, slit rolls, and sheets
- Main use: ESD handling, electronics protection, clean converting
