No products were found matching your selection.

Other Related Products

  • PET Film for Heat Transfer Printing

    • Material: Coated PET / polyester film
    • Common Thickness: 75μm, 100μm, 125μm
    • Surface: Matte, semi-matte, or clear coated
    • Peel Type: Hot peel, cold peel, warm peel
    • Width Range: 30cm, 60cm, 1,000mm, custom slit widths
    • Main Use: Heat transfer carrier film for industrial printing and decoration
    Read moreDone

  • COF of PET Film: Static and Kinetic Coefficient of Friction

    The COF of PET film describes resistance when a defined surface starts and continues sliding against another surface. This reference applies to uncoated, coated, treated and PET-based protective film used in unwinding, slitting, laminating and die cutting. Each result must be read with its tested sides, method, load and conditioning history. Equipment compatibility, adhesive behavior and removal performance still require sample testing on the actual material and process.

    Read moreDone

  • Pet Anti Scratch Film

    • Material: Polyester (PET) base film
    • Surface: Scratch-resistant or hard-coated
    • Thickness: Common custom range 20–120 μm
    • Finish: Clear, matte, or anti-glare optional
    • Adhesion: Controlled low, medium, or high peel
    • Supply Form: Roll, sheet, or die-cut parts
    Read moreDone

  • Release Coating Polyester Film

    • Material:PET polyester film
    • Coating side:Single side, double side, or differential A/B side
    • Coating system:Silicone, non-silicone, or fluoropolymer release coating
    • Thickness:25–188 μm common range
    • Color:Clear, translucent, milky white, or customized appearance
    • Release force: 3–150 gf/in, adjusted by adhesive system
    Read moreDone

  • Laser Cut Polyester Film

    • Common thickness: 12–250 microns
    • Material type: PET / polyester film
    • Color options: clear, white, black, matte, translucent
    • Supply format: rolls, sheets, kiss-cut parts, full-cut parts
    • Surface structure: plain, coated, adhesive-backed, liner laminated
    • Typical uses: insulation parts, overlays, stencil film, masking, custom components
    Read moreDone

  • Optical Clear Adhesive Film

    • Adhesive thickness: 25-250 um
    • Color: Water-clear transparent
    • Adhesive: Optical-grade acrylic PSA
    • Liners: Differential PET release films
    • Formats: Rolls, sheets, die-cut parts
    • Bonding surfaces: Glass, PET, PMMA, PC
    Read moreDone

  • Custom Die Cut Pet Films

    • Material: PET polyester film
    • Color options: clear, matte, white, black, or custom
    • Common thickness: approx. 25–250 microns
    • Supply format: die cut pieces, kiss-cut sheets, or roll form
    • Adhesive option: single-sided, double-sided, or non-adhesive
    • Liner option: paper liner, film liner, or differential release liner
    Read moreDone

  • Ceramic Tile Protective Film

    • Material: Polyethylene (PE) protective film
    • Thickness: 30–100 microns (custom available)
    • Adhesion: Low to medium tack, surface-adjustable
    • Color: Transparent, blue, black/white, custom colors
    • Width: 50mm–1200mm (custom slitting supported)
    • Length: 50m–2000m (jumbo roll supply available)
    Read moreDone

  • Release Liner For Stickers

    • Material:Glassine paper, kraft paper, PE coated paper, or PET film
    • Color:White, yellow, blue, clear, or custom color
    • Thickness:Paper 40–120gsm; PET film 25–75μm
    • Release Side:One-side or two-side silicone coating
    • Format:Jumbo roll, slit roll, sheet liner, or custom width
    • Use:Sticker rolls, kiss-cut sheets, printed stickers, and labels
    Read moreDone