No products were found matching your selection.
Other Related Products
-
- Material: PET base film
- Finish: clear, matte, or ultra-matte
- Surface Function: anti-smudge and easy-clean
- Thickness: customizable by end use
- Adhesive: silicone, acrylic, OCA, or non-tacky
- Supply Form: jumbo roll, slit roll, or sheet
-
Conventional PET and BOPET films commonly show a polyester film melting temperature of about 245-260 C by DSC. The reported onset, peak, or endset varies with grade, orientation, thermal history, and scan conditions. Use it for base-film identification, not as a finished-film service limit. Confirm adhesive, coating, surface, dwell, and removal behavior under intended conditions.
-
- Material:PET polyester film
- Coating side:Single side, double side, or differential A/B side
- Coating system:Silicone, non-silicone, or fluoropolymer release coating
- Thickness:25–188 μm common range
- Color:Clear, translucent, milky white, or customized appearance
- Release force: 3–150 gf/in, adjusted by adhesive system
-
- Thickness: 60–300 μm
- Width: 200–1000 mm (custom slit widths available)
- Structure: PA/PE, PA/EVOH/PE multilayer
- Color: High clarity, optional light tint
- Process: Thermoforming, vacuum packaging, MAP
- Surface: Corona treated / printable
-
Clear shipping film for amplifier control panels helps limit scratches, scuffs, trapped dust, fingerprints, and packaging contact marks on display windows, printed overlays, painted faceplates, and plastic control areas during assembly, storage, and transport. The correct film is not selected by transparency alone. It must provide enough surface contact to remain stable without creating excessive removal force after the planned protection period. Surface type, coating condition, panel geometry, packaging pressure, temperature, humidity, transport distance, and the intended removal method should all be evaluated on an actual panel before full use.
-
A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.
-
- Base Material: Clear or blue PET film
- Coating Type: Silicone-free release coating
- Common Thickness: 25μm, 36μm, 50μm, 75μm, 100μm, 125μm
- Release Force: 5–30 g/in, 30–80 g/in, 80–150 g/in options
- Roll Format: Narrow slit rolls or master rolls, 3 inch or 6 inch cor
- Main Uses: OCA, electronics die cutting, medical adhesive tape, precision adhesive converting
-
- Residue-Free Removal: Easily peel off without leaving any adhesive residue, ensuring a clean surface.
- Customizable Adhesion Levels: Available in low, medium, and high adhesion strengths to suit different processing needs.
- UV and Weather Resistant: Suitable for both indoor and limited outdoor applications, with UV stability up to 3 months.
- Printable Surface: Option to print logos or handling instructions, enhancing brand visibility.
- Eco-Friendly Materials: Made from recyclable polyethylene (PE), compliant with RoHS and REACH standards.
- Versatile Application: Ideal for protecting mirror, brushed, and matte stainless steel surfaces during various processes.
-
- Material: BOPET / polyester film
- Surface Treatment: One-side or both-side corona
- Thickness: 8–75 microns
- Appearance: Clear, clean, smooth
- Treated Side: Commonly 50–52+ dyn/cm
- Use: Printing, coating, lamination, tape, metallizing
