No products were found matching your selection.
Other Related Products
-
- Material: anti-static treated PET polyester film
- Color: clear, transparent, blue tint, or custom color
- Surface option: single-side or double-side treatment
- Thickness: available in multiple converting grades
- Supply form: master rolls, slit rolls, and sheets
- Main use: ESD handling, electronics protection, clean converting
-
Conventional PET and BOPET films commonly show a polyester film melting temperature of about 245-260 C by DSC. The reported onset, peak, or endset varies with grade, orientation, thermal history, and scan conditions. Use it for base-film identification, not as a finished-film service limit. Confirm adhesive, coating, surface, dwell, and removal behavior under intended conditions.
-
- Material: Polyethylene (PE) base film
- Adhesive Type: Water‑based acrylic / pressure‑sensitive adhesive
- Thickness: 30–120 microns range
- Colors: Transparent, blue, black & white
- Widths: 200–2000 mm customizable
- Roll Lengths: 100–2000 m per roll
-
Clear shipping film for amplifier control panels helps limit scratches, scuffs, trapped dust, fingerprints, and packaging contact marks on display windows, printed overlays, painted faceplates, and plastic control areas during assembly, storage, and transport. The correct film is not selected by transparency alone. It must provide enough surface contact to remain stable without creating excessive removal force after the planned protection period. Surface type, coating condition, panel geometry, packaging pressure, temperature, humidity, transport distance, and the intended removal method should all be evaluated on an actual panel before full use.
-
- Material: Nano hybrid glass composite
- Surface: Clear, smooth, oleophobic
- Hardness: 9H pencil hardness
- Adhesive: Full-area silicone layer
- Formats: Sheets, blanks, die-cut parts
- Uses: Mobile, automotive, industrial displays
-
The COF of PET film describes resistance when a defined surface starts and continues sliding against another surface. This reference applies to uncoated, coated, treated and PET-based protective film used in unwinding, slitting, laminating and die cutting. Each result must be read with its tested sides, method, load and conditioning history. Equipment compatibility, adhesive behavior and removal performance still require sample testing on the actual material and process.
-
- Material: Coated PET / polyester film
- Common Thickness: 75μm, 100μm, 125μm
- Surface: Matte, semi-matte, or clear coated
- Peel Type: Hot peel, cold peel, warm peel
- Width Range: 30cm, 60cm, 1,000mm, custom slit widths
- Main Use: Heat transfer carrier film for industrial printing and decoration
-
- Common thickness: 12–250 microns
- Material type: PET / polyester film
- Color options: clear, white, black, matte, translucent
- Supply format: rolls, sheets, kiss-cut parts, full-cut parts
- Surface structure: plain, coated, adhesive-backed, liner laminated
- Typical uses: insulation parts, overlays, stencil film, masking, custom components
-
- Material: PE film with removable acrylic adhesive
- Thickness: 50 um, 60 um, 80 um, 100 um
- Width: 600 mm, 900 mm, 1200 mm, or slit width
- Color: clear, blue, milky white, or printed
- Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
- Use: protects laminate planks during installation and handover
