No products were found matching your selection.
Other Related Products
-
- Roll Widths: 300–1,400 mm (custom to 1,350mm)
- Roll Length: Adjustable, typically 200–400 m
- MOQ: As low as 100 kg (≈500 kg for certain grades)
Customizable Enhancements:
- Anti-scratch or anti-fog coatings
- UV stabilization or conductive/ESD treatment
- Surface corona for improved printability
-
- Material:Flame retardant polyester film
- Thickness:25–250 μm typical range
- Color:Clear, milky white, black, or custom
- Flame Rating:UL94 VTM-rated options
- Surface:Untreated, corona treated, or coated
- Use:Battery, motor, transformer, and electronic insulation
-
- Material: anti-static treated PET polyester film
- Color: clear, transparent, blue tint, or custom color
- Surface option: single-side or double-side treatment
- Thickness: available in multiple converting grades
- Supply form: master rolls, slit rolls, and sheets
- Main use: ESD handling, electronics protection, clean converting
-
- Material: BOPET / polyester film
- Surface Treatment: One-side or both-side corona
- Thickness: 8–75 microns
- Appearance: Clear, clean, smooth
- Treated Side: Commonly 50–52+ dyn/cm
- Use: Printing, coating, lamination, tape, metallizing
-
- Material: PE film with removable acrylic adhesive
- Thickness: 50 um, 60 um, 80 um, 100 um
- Width: 600 mm, 900 mm, 1200 mm, or slit width
- Color: clear, blue, milky white, or printed
- Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
- Use: protects laminate planks during installation and handover
-
The COF of PET film describes resistance when a defined surface starts and continues sliding against another surface. This reference applies to uncoated, coated, treated and PET-based protective film used in unwinding, slitting, laminating and die cutting. Each result must be read with its tested sides, method, load and conditioning history. Equipment compatibility, adhesive behavior and removal performance still require sample testing on the actual material and process.
-
- Adhesive thickness: 25-250 um
- Color: Water-clear transparent
- Adhesive: Optical-grade acrylic PSA
- Liners: Differential PET release films
- Formats: Rolls, sheets, die-cut parts
- Bonding surfaces: Glass, PET, PMMA, PC
-
- Common thickness: 12–250 microns
- Material type: PET / polyester film
- Color options: clear, white, black, matte, translucent
- Supply format: rolls, sheets, kiss-cut parts, full-cut parts
- Surface structure: plain, coated, adhesive-backed, liner laminated
- Typical uses: insulation parts, overlays, stencil film, masking, custom components
-
A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.
