No products were found matching your selection.

Other Related Products

  • Appliance Cover Film

    • Material: PE protective film
    • Common thickness: 30–100 microns
    • Standard colors: clear, blue, black & white
    • Adhesion level: low to medium tack
    • Typical widths: 200–1600 mm
    • Main use: temporary appliance surface protection
    Read moreDone

  • Laminate Floor Protection Film

    • Material: PE film with removable acrylic adhesive
    • Thickness: 50 um, 60 um, 80 um, 100 um
    • Width: 600 mm, 900 mm, 1200 mm, or slit width
    • Color: clear, blue, milky white, or printed
    • Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
    • Use: protects laminate planks during installation and handover
    Read moreDone

  • Plastic Films for Flooring Industry: Surface Protection During Production & Installation

    Plastic films for flooring industry applications should be selected around the actual finish and process stage, not simply because a surface is called hard flooring. Laminate, embossed SPC or LVT, ceramic tile, and sealed stone can react differently to temporary adhesive contact. This solution covers production, handling, transport, installation, and planned removal. Key risks include scratches, trapped contamination, edge lift, film movement, adhesive transfer, haze, and surface change. Selection should consider texture, coating condition, dwell time, environment, traffic, removal timing, and actual trial results.

    Read moreDone

  • Release Liner For Silicone Adhesive

    • Material: Fluoro-silicone coated PET film
    • Color: Clear, milky white, or customized tone
    • Thickness: 50μm, 75μm, 100μm, custom thickness available
    • Release side: Single-side or differential release
    • Adhesive match: Silicone PSA, silicone tape, soft medical gel adhesive
    • Key function: Clean release with controlled peel force
    Read moreDone

  • Plastic Film for Injection Molding

    • Materials: PC, PET, acrylic, or multilayer film
    • Thickness: Common project range 125-500 um
    • Appearance: Clear, tinted, translucent, printed, or metallic
    • Finish: Gloss, matte, textured, or formable coated surface
    • Supply: Rolls, sheets, printed blanks, or preformed inserts
    • Process: Printing, forming, trimming, and back-injection
    Read moreDone

  • Plastic Sheet Protective Film

    • Material: PE surface protection film
    • Adhesive: removable acrylic system
    • Color: clear, blue, black & white
    • Thickness: standard and custom options
    • Printing: plain or logo printable
    • Use: temporary protection for plastic sheets
    Read moreDone

  • COF of PET Film

    COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…

    Read moreDone

  • PET Film for Heat Transfer Printing

    • Material: Coated PET / polyester film
    • Common Thickness: 75μm, 100μm, 125μm
    • Surface: Matte, semi-matte, or clear coated
    • Peel Type: Hot peel, cold peel, warm peel
    • Width Range: 30cm, 60cm, 1,000mm, custom slit widths
    • Main Use: Heat transfer carrier film for industrial printing and decoration
    Read moreDone

  • Optical Clear Adhesive Film

    • Adhesive thickness: 25-250 um
    • Color: Water-clear transparent
    • Adhesive: Optical-grade acrylic PSA
    • Liners: Differential PET release films
    • Formats: Rolls, sheets, die-cut parts
    • Bonding surfaces: Glass, PET, PMMA, PC
    Read moreDone