No products were found matching your selection.

Other Related Products

  • Super Matte Finished PET Film

    • Material:BOPET / polyester film
    • Finish:Super matte, low gloss
    • Thickness:12–100 μm, common range
    • Width:500–2050 mm, slit roll available
    • Color:Clear, translucent, white, or matte metallized
    • Use:Printing, lamination, labels, packaging, decorative surfaces
    Read moreDone

  • Laminate Floor Protection Film

    • Material: PE film with removable acrylic adhesive
    • Thickness: 50 um, 60 um, 80 um, 100 um
    • Width: 600 mm, 900 mm, 1200 mm, or slit width
    • Color: clear, blue, milky white, or printed
    • Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
    • Use: protects laminate planks during installation and handover
    Read moreDone

  • Stone Protection Film

    • Material: PE or PET protective film
    • Color: clear, translucent, black & white
    • Thickness: 50–100 microns typical
    • Adhesive: water-based acrylic or acrylic PSA
    • Width: custom slit rolls and sheet formats
    • Use stage: fabrication, transport, installation, renovation
    Read moreDone

  • Appliance Cover Film

    • Material: PE protective film
    • Common thickness: 30–100 microns
    • Standard colors: clear, blue, black & white
    • Adhesion level: low to medium tack
    • Typical widths: 200–1600 mm
    • Main use: temporary appliance surface protection
    Read moreDone

  • Ceramic Tile Protective Film

    • Material: Polyethylene (PE) protective film
    • Thickness: 30–100 microns (custom available)
    • Adhesion: Low to medium tack, surface-adjustable
    • Color: Transparent, blue, black/white, custom colors
    • Width: 50mm–1200mm (custom slitting supported)
    • Length: 50m–2000m (jumbo roll supply available)
    Read moreDone

  • Release Liner For Silicone Adhesive

    • Material: Fluoro-silicone coated PET film
    • Color: Clear, milky white, or customized tone
    • Thickness: 50μm, 75μm, 100μm, custom thickness available
    • Release side: Single-side or differential release
    • Adhesive match: Silicone PSA, silicone tape, soft medical gel adhesive
    • Key function: Clean release with controlled peel force
    Read moreDone

  • PET Film Electrical Insulation

    • Material: Electrical grade PET film / polyester film
    • Thickness:25–350 micron
    • Color:Clear, white, black, blue, or custom color
    • Surface:Smooth, corona-treated, coated, or laminated
    • Format:Jumbo roll, slit roll, sheet, strip, die-cut part
    • Use:Motor, transformer, coil, cable, battery, electronics
    Read moreDone

  • Laser Cut Polyester Film

    • Common thickness: 12–250 microns
    • Material type: PET / polyester film
    • Color options: clear, white, black, matte, translucent
    • Supply format: rolls, sheets, kiss-cut parts, full-cut parts
    • Surface structure: plain, coated, adhesive-backed, liner laminated
    • Typical uses: insulation parts, overlays, stencil film, masking, custom components
    Read moreDone

  • COF of PET Film

    COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…

    Read moreDone