No products were found matching your selection.

Other Related Products

  • Pa Pe Thermoforming Film

    • Thickness: 60–300 μm
    • Width: 200–1000 mm (custom slit widths available)
    • Structure: PA/PE, PA/EVOH/PE multilayer
    • Color: High clarity, optional light tint
    • Process: Thermoforming, vacuum packaging, MAP
    • Surface: Corona treated / printable
    Read moreDone

  • Transparent Conductive ITO PET Film

    • Material: Optical-grade PET with single-side ITO coating
    • Color: Clear with a slight blue-gray tint
    • PET thickness: 125, 175, or 200 um
    • Sheet resistance: 10, 60, 100, 200, or 300 ohm/sq
    • Supply form: Rolls, sheets, slit rolls, or converted parts
    • Main uses: Touch electrodes, transparent heating, and EMI/RFI shielding
    Read moreDone

  • Super Matte Finished PET Film

    • Material:BOPET / polyester film
    • Finish:Super matte, low gloss
    • Thickness:12–100 μm, common range
    • Width:500–2050 mm, slit roll available
    • Color:Clear, translucent, white, or matte metallized
    • Use:Printing, lamination, labels, packaging, decorative surfaces
    Read moreDone

  • PET Film Electrical Insulation

    • Material: Electrical grade PET film / polyester film
    • Thickness:25–350 micron
    • Color:Clear, white, black, blue, or custom color
    • Surface:Smooth, corona-treated, coated, or laminated
    • Format:Jumbo roll, slit roll, sheet, strip, die-cut part
    • Use:Motor, transformer, coil, cable, battery, electronics
    Read moreDone

  • Pet Anti Scratch Film

    • Material: Polyester (PET) base film
    • Surface: Scratch-resistant or hard-coated
    • Thickness: Common custom range 20–120 μm
    • Finish: Clear, matte, or anti-glare optional
    • Adhesion: Controlled low, medium, or high peel
    • Supply Form: Roll, sheet, or die-cut parts
    Read moreDone

  • Ceramic Tile Protective Film

    • Material: Polyethylene (PE) protective film
    • Thickness: 30–100 microns (custom available)
    • Adhesion: Low to medium tack, surface-adjustable
    • Color: Transparent, blue, black/white, custom colors
    • Width: 50mm–1200mm (custom slitting supported)
    • Length: 50m–2000m (jumbo roll supply available)
    Read moreDone

  • Protective Film Solutions for Appliance Touch Controls During Manufacturing

    Plastic film for appliance touch controls is used to protect appearance-sensitive interfaces while glass, printed overlays, display windows, decorative panels, and surrounding housings move through manufacturing. The challenge is not simply preventing scratches. A film can introduce a new problem if its adhesion is mismatched, contamination is trapped beneath it, an edge lifts near a cutout, or the temporary layer changes a capacitive touch check. This solution focuses on surface identification, controlled application, sample validation, film-on versus film-off functional checks, planned removal, and failure diagnosis before full production use.

    Read moreDone

  • COF of PET Film

    COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…

    Read moreDone

  • Anti Fog PET Film

    • Material: Clear PET film with anti-fog coating
    • Color: Transparent / clear
    • Thickness: 50–250 micron
    • Surface: Single-side or double-side anti-fog
    • Format: Roll, sheet, slit roll, die-cut piece
    • Use: Packaging windows, face shields, clear covers
    Read moreDone