No products were found matching your selection.

Other Related Products

  • Stone Protection Film

    • Material: PE or PET protective film
    • Color: clear, translucent, black & white
    • Thickness: 50–100 microns typical
    • Adhesive: water-based acrylic or acrylic PSA
    • Width: custom slit rolls and sheet formats
    • Use stage: fabrication, transport, installation, renovation
    Read moreDone

  • Laser Cut Polyester Film

    • Common thickness: 12–250 microns
    • Material type: PET / polyester film
    • Color options: clear, white, black, matte, translucent
    • Supply format: rolls, sheets, kiss-cut parts, full-cut parts
    • Surface structure: plain, coated, adhesive-backed, liner laminated
    • Typical uses: insulation parts, overlays, stencil film, masking, custom components
    Read moreDone

  • Ceramic Tile Protective Film

    • Material: Polyethylene (PE) protective film
    • Thickness: 30–100 microns (custom available)
    • Adhesion: Low to medium tack, surface-adjustable
    • Color: Transparent, blue, black/white, custom colors
    • Width: 50mm–1200mm (custom slitting supported)
    • Length: 50m–2000m (jumbo roll supply available)
    Read moreDone

  • Polyester Film Melting Temperature Technical Data

    Conventional PET and BOPET films commonly show a polyester film melting temperature of about 245-260 C by DSC. The reported onset, peak, or endset varies with grade, orientation, thermal history, and scan conditions. Use it for base-film identification, not as a finished-film service limit. Confirm adhesive, coating, surface, dwell, and removal behavior under intended conditions.

    Read moreDone

  • Protective Film Solutions for Appliance Touch Controls During Manufacturing

    Plastic film for appliance touch controls is used to protect appearance-sensitive interfaces while glass, printed overlays, display windows, decorative panels, and surrounding housings move through manufacturing. The challenge is not simply preventing scratches. A film can introduce a new problem if its adhesion is mismatched, contamination is trapped beneath it, an edge lifts near a cutout, or the temporary layer changes a capacitive touch check. This solution focuses on surface identification, controlled application, sample validation, film-on versus film-off functional checks, planned removal, and failure diagnosis before full production use.

    Read moreDone

  • Optical Clear Adhesive Film

    • Adhesive thickness: 25-250 um
    • Color: Water-clear transparent
    • Adhesive: Optical-grade acrylic PSA
    • Liners: Differential PET release films
    • Formats: Rolls, sheets, die-cut parts
    • Bonding surfaces: Glass, PET, PMMA, PC
    Read moreDone

  • Release Liner For Stickers

    • Material:Glassine paper, kraft paper, PE coated paper, or PET film
    • Color:White, yellow, blue, clear, or custom color
    • Thickness:Paper 40–120gsm; PET film 25–75μm
    • Release Side:One-side or two-side silicone coating
    • Format:Jumbo roll, slit roll, sheet liner, or custom width
    • Use:Sticker rolls, kiss-cut sheets, printed stickers, and labels
    Read moreDone

  • Sheet Metal Protective Film

    • Material: PE protective film
    • Color: Clear, blue, black & white
    • Thickness: 40–100 microns
    • Adhesion: Low, medium, high tack
    • Roll Width: 50–1240 mm
    • Use Stage: Processing, storage, transit, installation
    Read moreDone

  • Release Coating Polyester Film

    • Material:PET polyester film
    • Coating side:Single side, double side, or differential A/B side
    • Coating system:Silicone, non-silicone, or fluoropolymer release coating
    • Thickness:25–188 μm common range
    • Color:Clear, translucent, milky white, or customized appearance
    • Release force: 3–150 gf/in, adjusted by adhesive system
    Read moreDone