No products were found matching your selection.

Other Related Products

  • Laminate Floor Protection Film

    • Material: PE film with removable acrylic adhesive
    • Thickness: 50 um, 60 um, 80 um, 100 um
    • Width: 600 mm, 900 mm, 1200 mm, or slit width
    • Color: clear, blue, milky white, or printed
    • Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
    • Use: protects laminate planks during installation and handover
    Read moreDone

  • COF of PET Film

    COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…

    Read moreDone

  • Appliance Cover Film

    • Material: PE protective film
    • Common thickness: 30–100 microns
    • Standard colors: clear, blue, black & white
    • Adhesion level: low to medium tack
    • Typical widths: 200–1600 mm
    • Main use: temporary appliance surface protection
    Read moreDone

  • Siliconized Film Release Liners

    • Material: PET film with siliconized release surface
    • Thickness: 25 / 36 / 50 / 75 / 100 micron
    • Color: Clear, milky white, blue tint or customized
    • Release Type: Single-side, double-side or differential release
    • Roll Form: Jumbo roll or slit roll
    • Main Uses: Labels, tapes, die-cut parts, PSA lamination
    Read moreDone

  • Non Silicone Release Liner

    • Base Material: Clear or blue PET film
    • Coating Type: Silicone-free release coating
    • Common Thickness: 25μm, 36μm, 50μm, 75μm, 100μm, 125μm
    • Release Force: 5–30 g/in, 30–80 g/in, 80–150 g/in options
    • Roll Format: Narrow slit rolls or master rolls, 3 inch or 6 inch cor
    • Main Uses: OCA, electronics die cutting, medical adhesive tape, precision adhesive converting
    Read moreDone

  • Plastic Film For Injection Molding

    • Material: PC, PE, PMMA, or multi-layer film
    • Finish: gloss, matte, textured, anti-glare, or printed
    • Color: clear, tinted, white, black, or custom
    • Thickness: selected by forming depth and geometry
    • Process: printing, thermoforming, trimming, and back-injection
    • Use: IMD, FIM, HMI panels, trim parts, and decorative housings
    Read moreDone

  • Glass Protective Film

    • Thickness: 50–180 microns
    • Material: PE temporary surface protection film
    • Adhesion: Low to medium removable system
    • Color: Clear, blue, milky white
    • Width: 100–2000 mm
    • Application: Glass panels, windows, facade systems
    Read moreDone

  • Custom Die Cut Pet Films

    • Material: PET polyester film
    • Color options: clear, matte, white, black, or custom
    • Common thickness: approx. 25–250 microns
    • Supply format: die cut pieces, kiss-cut sheets, or roll form
    • Adhesive option: single-sided, double-sided, or non-adhesive
    • Liner option: paper liner, film liner, or differential release liner
    Read moreDone

  • Protective Film for Aluminium Composite Panel

    • Material: Polyethylene (PE) base film
    • Adhesive Type: Water‑based acrylic / pressure‑sensitive adhesive
    • Thickness: 30–120 microns range
    • Colors: Transparent, blue, black & white
    • Widths: 200–2000 mm customizable
    • Roll Lengths: 100–2000 m per roll
    Read moreDone