No products were found matching your selection.

Other Related Products

  • COF of PET Film

    COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…

    Read moreDone

  • Release Liner For Stickers

    • Material:Glassine paper, kraft paper, PE coated paper, or PET film
    • Color:White, yellow, blue, clear, or custom color
    • Thickness:Paper 40–120gsm; PET film 25–75μm
    • Release Side:One-side or two-side silicone coating
    • Format:Jumbo roll, slit roll, sheet liner, or custom width
    • Use:Sticker rolls, kiss-cut sheets, printed stickers, and labels
    Read moreDone

  • PET Film Electrical Insulation

    • Material: Electrical grade PET film / polyester film
    • Thickness:25–350 micron
    • Color:Clear, white, black, blue, or custom color
    • Surface:Smooth, corona-treated, coated, or laminated
    • Format:Jumbo roll, slit roll, sheet, strip, die-cut part
    • Use:Motor, transformer, coil, cable, battery, electronics
    Read moreDone

  • Corona Treatment PET Film

    • Material: BOPET / polyester film
    • Surface Treatment: One-side or both-side corona
    • Thickness: 8–75 microns
    • Appearance: Clear, clean, smooth
    • Treated Side: Commonly 50–52+ dyn/cm
    • Use: Printing, coating, lamination, tape, metallizing
    Read moreDone

  • Ceramic Tile Protective Film

    • Material: Polyethylene (PE) protective film
    • Thickness: 30–100 microns (custom available)
    • Adhesion: Low to medium tack, surface-adjustable
    • Color: Transparent, blue, black/white, custom colors
    • Width: 50mm–1200mm (custom slitting supported)
    • Length: 50m–2000m (jumbo roll supply available)
    Read moreDone

  • Transparent Conductive Ito Pet Film

    • Material: Optical PET with ITO conductive coating
    • Color: Clear transparent
    • Common thickness: 125 μm / 175 μm / 200 μm
    • Coating side: One-side conductive surface
    • Supply format: Rolls, sheets, slit rolls, custom-cut parts
    • Main uses: Touch, display, heater, shielding, sensor parts
    Read moreDone

  • Super Matte Finished PET Film

    • Material:BOPET / polyester film
    • Finish:Super matte, low gloss
    • Thickness:12–100 μm, common range
    • Width:500–2050 mm, slit roll available
    • Color:Clear, translucent, white, or matte metallized
    • Use:Printing, lamination, labels, packaging, decorative surfaces
    Read moreDone

  • Appliance Cover Film

    • Material: PE protective film
    • Common thickness: 30–100 microns
    • Standard colors: clear, blue, black & white
    • Adhesion level: low to medium tack
    • Typical widths: 200–1600 mm
    • Main use: temporary appliance surface protection
    Read moreDone

  • High-performance Membrane Switch Protection Film

    • Material: PE or PET protective film
    • Color: clear or translucent
    • Adhesive type: removable PSA
    • Surface focus: overlays and display windows
    • Process fit: printing, die cutting, lamination
    • Main purpose: temporary surface protection
    Read moreDone