No products were found matching your selection.

Other Related Products

  • Chemically Treated PET Film

    • Material: Biaxially oriented PET
    • Color: Clear or custom tinted
    • Thickness: Typically 8-250 um
    • Treatment: One-side, two-side, or asymmetric
    • Width: Typically 100-2200 mm
    • Format: Master rolls, slit rolls, or sheets
    Read moreDone

  • High-performance Membrane Switch Protection Film

    • Material: PE or PET protective film
    • Color: clear or translucent
    • Adhesive type: removable PSA
    • Surface focus: overlays and display windows
    • Process fit: printing, die cutting, lamination
    • Main purpose: temporary surface protection
    Read moreDone

  • COF of PET Film: Static and Kinetic Coefficient of Friction

    The COF of PET film describes resistance when a defined surface starts and continues sliding against another surface. This reference applies to uncoated, coated, treated and PET-based protective film used in unwinding, slitting, laminating and die cutting. Each result must be read with its tested sides, method, load and conditioning history. Equipment compatibility, adhesive behavior and removal performance still require sample testing on the actual material and process.

    Read moreDone

  • Stone Protection Film

    • Material: PE or PET protective film
    • Color: clear, translucent, black & white
    • Thickness: 50–100 microns typical
    • Adhesive: water-based acrylic or acrylic PSA
    • Width: custom slit rolls and sheet formats
    • Use stage: fabrication, transport, installation, renovation
    Read moreDone

  • Release Coating Polyester Film

    • Material:PET polyester film
    • Coating side:Single side, double side, or differential A/B side
    • Coating system:Silicone, non-silicone, or fluoropolymer release coating
    • Thickness:25–188 μm common range
    • Color:Clear, translucent, milky white, or customized appearance
    • Release force: 3–150 gf/in, adjusted by adhesive system
    Read moreDone

  • PET Film for Heat Transfer Printing

    • Material: Coated PET / polyester film
    • Common Thickness: 75μm, 100μm, 125μm
    • Surface: Matte, semi-matte, or clear coated
    • Peel Type: Hot peel, cold peel, warm peel
    • Width Range: 30cm, 60cm, 1,000mm, custom slit widths
    • Main Use: Heat transfer carrier film for industrial printing and decoration
    Read moreDone

  • Polyester Film Uv Resistance

    • Material: Biaxially oriented polyester (BOPET)
    • Thickness: Available in custom thicknesses ranging from 0.05mm to 0.5mm
    • Color: Clear, with options for custom tinting
    • UV Resistance: High-level UV blocking and stabilizer additives
    • Durability: Excellent resistance to weathering, chemicals, and abrasion
    • Applications: Suitable for outdoor signage, protective overlays, and solar back sheets
    Read moreDone

  • Corona Treatment PET Film

    • Material: BOPET / polyester film
    • Surface Treatment: One-side or both-side corona
    • Thickness: 8–75 microns
    • Appearance: Clear, clean, smooth
    • Treated Side: Commonly 50–52+ dyn/cm
    • Use: Printing, coating, lamination, tape, metallizing
    Read moreDone

  • Polyester Film Melting Temperature Technical Data

    Conventional PET and BOPET films commonly show a polyester film melting temperature of about 245-260 C by DSC. The reported onset, peak, or endset varies with grade, orientation, thermal history, and scan conditions. Use it for base-film identification, not as a finished-film service limit. Confirm adhesive, coating, surface, dwell, and removal behavior under intended conditions.

    Read moreDone