No products were found matching your selection.

Other Related Products

  • Plastic Sheet Protective Film

    • Material: PE surface protection film
    • Adhesive: removable acrylic system
    • Color: clear, blue, black & white
    • Thickness: standard and custom options
    • Printing: plain or logo printable
    • Use: temporary protection for plastic sheets
    Read moreDone

  • Siliconized Film Release Liners

    • Material: PET film with siliconized release surface
    • Thickness: 25 / 36 / 50 / 75 / 100 micron
    • Color: Clear, milky white, blue tint or customized
    • Release Type: Single-side, double-side or differential release
    • Roll Form: Jumbo roll or slit roll
    • Main Uses: Labels, tapes, die-cut parts, PSA lamination
    Read moreDone

  • Release Liner For Silicone Adhesive

    • Material: Fluoro-silicone coated PET film
    • Color: Clear, milky white, or customized tone
    • Thickness: 50μm, 75μm, 100μm, custom thickness available
    • Release side: Single-side or differential release
    • Adhesive match: Silicone PSA, silicone tape, soft medical gel adhesive
    • Key function: Clean release with controlled peel force
    Read moreDone

  • Polyester Film Melting Temperature Technical Data

    Conventional PET and BOPET films commonly show a polyester film melting temperature of about 245-260 C by DSC. The reported onset, peak, or endset varies with grade, orientation, thermal history, and scan conditions. Use it for base-film identification, not as a finished-film service limit. Confirm adhesive, coating, surface, dwell, and removal behavior under intended conditions.

    Read moreDone

  • Pa Pe Thermoforming Film

    • Thickness: 60–300 μm
    • Width: 200–1000 mm (custom slit widths available)
    • Structure: PA/PE, PA/EVOH/PE multilayer
    • Color: High clarity, optional light tint
    • Process: Thermoforming, vacuum packaging, MAP
    • Surface: Corona treated / printable
    Read moreDone

  • COF of PET Film: Static and Kinetic Coefficient of Friction

    The COF of PET film describes resistance when a defined surface starts and continues sliding against another surface. This reference applies to uncoated, coated, treated and PET-based protective film used in unwinding, slitting, laminating and die cutting. Each result must be read with its tested sides, method, load and conditioning history. Equipment compatibility, adhesive behavior and removal performance still require sample testing on the actual material and process.

    Read moreDone

  • Glass Protective Film

    • Thickness: 50–180 microns
    • Material: PE temporary surface protection film
    • Adhesion: Low to medium removable system
    • Color: Clear, blue, milky white
    • Width: 100–2000 mm
    • Application: Glass panels, windows, facade systems
    Read moreDone

  • Non Silicone Release Liner

    • Base Material: Clear or blue PET film
    • Coating Type: Silicone-free release coating
    • Common Thickness: 25μm, 36μm, 50μm, 75μm, 100μm, 125μm
    • Release Force: 5–30 g/in, 30–80 g/in, 80–150 g/in options
    • Roll Format: Narrow slit rolls or master rolls, 3 inch or 6 inch cor
    • Main Uses: OCA, electronics die cutting, medical adhesive tape, precision adhesive converting
    Read moreDone

  • Flame Retardant PET Film

    • Material:Flame retardant polyester film
    • Thickness:25–250 μm typical range
    • Color:Clear, milky white, black, or custom
    • Flame Rating:UL94 VTM-rated options
    • Surface:Untreated, corona treated, or coated
    • Use:Battery, motor, transformer, and electronic insulation
    Read moreDone