No products were found matching your selection.
Other Related Products
-
- Material: PET film with siliconized release surface
- Thickness: 25 / 36 / 50 / 75 / 100 micron
- Color: Clear, milky white, blue tint or customized
- Release Type: Single-side, double-side or differential release
- Roll Form: Jumbo roll or slit roll
- Main Uses: Labels, tapes, die-cut parts, PSA lamination
-
- Material: PE film
- Color: Clear, blue, or milky white
- Adhesive: Low-tack acrylic
- Typical Thickness: 50–100 μm
- Supply Form: Slit rolls or larger rolls
- Main Use: Temporary screen surface protection
-
A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.
-
- Material: Biaxially oriented polyester (BOPET)
- Thickness: Available in custom thicknesses ranging from 0.05mm to 0.5mm
- Color: Clear, with options for custom tinting
- UV Resistance: High-level UV blocking and stabilizer additives
- Durability: Excellent resistance to weathering, chemicals, and abrasion
- Applications: Suitable for outdoor signage, protective overlays, and solar back sheets
-
- Material: Polyethylene (PE) protective film
- Thickness: 30–100 microns (custom available)
- Adhesion: Low to medium tack, surface-adjustable
- Color: Transparent, blue, black/white, custom colors
- Width: 50mm–1200mm (custom slitting supported)
- Length: 50m–2000m (jumbo roll supply available)
-
- Material: Clear PET film with anti-fog coating
- Color: Transparent / clear
- Thickness: 50–250 micron
- Surface: Single-side or double-side anti-fog
- Format: Roll, sheet, slit roll, die-cut piece
- Use: Packaging windows, face shields, clear covers
-
- Base Material: Clear or blue PET film
- Coating Type: Silicone-free release coating
- Common Thickness: 25μm, 36μm, 50μm, 75μm, 100μm, 125μm
- Release Force: 5–30 g/in, 30–80 g/in, 80–150 g/in options
- Roll Format: Narrow slit rolls or master rolls, 3 inch or 6 inch cor
- Main Uses: OCA, electronics die cutting, medical adhesive tape, precision adhesive converting
-
- Film: PE or PET
- Colors: clear, blue, milky white
- Tack: low or medium
- Surfaces: mirror face, mirror backing
- Supply: slit rolls or jumbo rolls
- Use: cutting, edging, storage, transport
-
Conventional PET and BOPET films commonly show a polyester film melting temperature of about 245-260 C by DSC. The reported onset, peak, or endset varies with grade, orientation, thermal history, and scan conditions. Use it for base-film identification, not as a finished-film service limit. Confirm adhesive, coating, surface, dwell, and removal behavior under intended conditions.
