No products were found matching your selection.

Other Related Products

  • PET Film Electrical Insulation

    • Material: Electrical grade PET film / polyester film
    • Thickness:25–350 micron
    • Color:Clear, white, black, blue, or custom color
    • Surface:Smooth, corona-treated, coated, or laminated
    • Format:Jumbo roll, slit roll, sheet, strip, die-cut part
    • Use:Motor, transformer, coil, cable, battery, electronics
    Read moreDone

  • Ceramic Tile Protective Film

    • Material: Polyethylene (PE) protective film
    • Thickness: 30–100 microns (custom available)
    • Adhesion: Low to medium tack, surface-adjustable
    • Color: Transparent, blue, black/white, custom colors
    • Width: 50mm–1200mm (custom slitting supported)
    • Length: 50m–2000m (jumbo roll supply available)
    Read moreDone

  • Pa Pe Thermoforming Film

    • Thickness: 60–300 μm
    • Width: 200–1000 mm (custom slit widths available)
    • Structure: PA/PE, PA/EVOH/PE multilayer
    • Color: High clarity, optional light tint
    • Process: Thermoforming, vacuum packaging, MAP
    • Surface: Corona treated / printable
    Read moreDone

  • Pet Anti Scratch Film

    • Material: Polyester (PET) base film
    • Surface: Scratch-resistant or hard-coated
    • Thickness: Common custom range 20–120 μm
    • Finish: Clear, matte, or anti-glare optional
    • Adhesion: Controlled low, medium, or high peel
    • Supply Form: Roll, sheet, or die-cut parts
    Read moreDone

  • Plastic Films for Flooring Industry: Surface Protection During Production & Installation

    Plastic films for flooring industry applications should be selected around the actual finish and process stage, not simply because a surface is called hard flooring. Laminate, embossed SPC or LVT, ceramic tile, and sealed stone can react differently to temporary adhesive contact. This solution covers production, handling, transport, installation, and planned removal. Key risks include scratches, trapped contamination, edge lift, film movement, adhesive transfer, haze, and surface change. Selection should consider texture, coating condition, dwell time, environment, traffic, removal timing, and actual trial results.

    Read moreDone

  • PET Protective Film for Anti Fingerprint

    • Material: PET base film
    • Finish: clear, matte, or ultra-matte
    • Surface Function: anti-smudge and easy-clean
    • Thickness: customizable by end use
    • Adhesive: silicone, acrylic, OCA, or non-tacky
    • Supply Form: jumbo roll, slit roll, or sheet
    Read moreDone
  • Placeholder

    Furniture Board Protective Film

    • Material: Removable PE film with acrylic adhesive
    • Color: Clear, blue, black and white, or printed
    • Thickness: Commonly 30-80 um; extended grades subject to review
    • Width: Custom slit widths for panel lines
    • Roll format: Machine-length or jumbo rolls
    • Surfaces: MDF, melamine, cabinet, and decorative boards
    Read moreDone

  • Appliance Cover Film

    • Material: PE protective film
    • Common thickness: 30–100 microns
    • Standard colors: clear, blue, black & white
    • Adhesion level: low to medium tack
    • Typical widths: 200–1600 mm
    • Main use: temporary appliance surface protection
    Read moreDone

  • Transparent Conductive ITO PET Film

    • Material: Optical-grade PET with single-side ITO coating
    • Color: Clear with a slight blue-gray tint
    • PET thickness: 125, 175, or 200 um
    • Sheet resistance: 10, 60, 100, 200, or 300 ohm/sq
    • Supply form: Rolls, sheets, slit rolls, or converted parts
    • Main uses: Touch electrodes, transparent heating, and EMI/RFI shielding
    Read moreDone