Sheet Metal Protective Film
- Material: PE protective film
- Color: Clear, blue, black & white
- Thickness: 40–100 microns
- Adhesion: Low, medium, high tack
- Roll Width: 50–1240 mm
- Use Stage: Processing, storage, transit, installation
No products were found matching your selection.
Other Related Products
-
-
Protective Film Solutions for Appliance Touch Controls During Manufacturing
Plastic film for appliance touch controls is used to protect appearance-sensitive interfaces while glass, printed overlays, display windows, decorative panels, and surrounding housings move through manufacturing. The challenge is not simply preventing scratches. A film can introduce a new problem if its adhesion is mismatched, contamination is trapped beneath it, an edge lifts near a cutout, or the temporary layer changes a capacitive touch check. This solution focuses on surface identification, controlled application, sample validation, film-on versus film-off functional checks, planned removal, and failure diagnosis before full production use.
-
Pet Anti Scratch Film
- Material: Polyester (PET) base film
- Surface: Scratch-resistant or hard-coated
- Thickness: Common custom range 20–120 μm
- Finish: Clear, matte, or anti-glare optional
- Adhesion: Controlled low, medium, or high peel
- Supply Form: Roll, sheet, or die-cut parts
-
Pet Thermoforming Film
- Roll Widths: 300–1,400 mm (custom to 1,350mm)
- Roll Length: Adjustable, typically 200–400 m
- MOQ: As low as 100 kg (≈500 kg for certain grades)
Customizable Enhancements:
- Anti-scratch or anti-fog coatings
- UV stabilization or conductive/ESD treatment
- Surface corona for improved printability
-
Protective Film for Aluminium Composite Panel
- Material: Polyethylene (PE) base film
- Adhesive Type: Water‑based acrylic / pressure‑sensitive adhesive
- Thickness: 30–120 microns range
- Colors: Transparent, blue, black & white
- Widths: 200–2000 mm customizable
- Roll Lengths: 100–2000 m per roll
-
COF of PET Film: Static and Kinetic Coefficient of Friction
The COF of PET film describes resistance when a defined surface starts and continues sliding against another surface. This reference applies to uncoated, coated, treated and PET-based protective film used in unwinding, slitting, laminating and die cutting. Each result must be read with its tested sides, method, load and conditioning history. Equipment compatibility, adhesive behavior and removal performance still require sample testing on the actual material and process.
-
Nano Hybrid Glass Screen Protector Film
- Material: Nano hybrid glass composite
- Surface: Clear, smooth, oleophobic
- Hardness: 9H pencil hardness
- Adhesive: Full-area silicone layer
- Formats: Sheets, blanks, die-cut parts
- Uses: Mobile, automotive, industrial displays
-
Protective Film for Electronics Shipping: Surface, ESD and Removal Validation
A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.
-
Polyester Film Heat Resistance
- Material: PET / BoPET polyester film
- Common thickness: 12–250 microns
- Color options: clear, milky white, matte, black
- Surface options: plain, corona treated, coated
- Supply format: jumbo roll, slit roll, sheet, die-cut
- Main uses: insulation, laminates, labels, protection